When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: My small Led And double din, and dashpad Project with pics and how to
Originally Posted by scooter
Oh, I just buy the LED strip in bulk and it shows where to cut. Then you trim the silicone off the contacts and solder on the wires, put a dab of something over the bare solder when finished, or not. I may consider doing this again when I put my car back together and wire them to the running lights or something
No Search for the Following on Ebay (2x 60cm Flexible Car Soft Tube LED Strip Light DRL Daytime Running Lamp White US) The come made I'm just saying if you want to go your route buying a Regular LED Strip will work better.
Re: My small Led And double din, and dashpad Project with pics and how to
So here's my Hatch Done. Same procedures, I could've got away with just the 2 on top on the Third Brake Light. But I did those last lol. So is 6 Total 2 by the brake lighst, 2 on the side and the 2 on top. All turn on by the blue Toggle switch on the left. I couldn't wire them to the hatch since my motor got messed up years ago, now I open the hatch with the key. Also since I disconnected that whole area beause somehting there was draining my battery. So here are the Pics. BTW the last pics shows how bright those running lights are. Everything looks brighter in person Phone didn't do justice.
Re: My small Led And double din, and dashpad Project with pics and how to
Unfortunately I had to sell my car This are the last pictures I took. Hopefully will buy a Trans-Am in the future. I Re-did the Light strip inside the bezel..
hopefully someone likes it and Added White LEDs to the fog lights. My Last Picture it will be missed.
Re: My small Led And double din, and dashpad Project with pics and how to
Originally Posted by salfirebird92
WOW, that is what I have been thinking about doing for a long time. It looks good, but kind of washes out the two housings behind, I would probably dim them just a tad.
Re: My small Led And double din, and dashpad Project with pics and how to
Originally Posted by scooter
WOW, that is what I have been thinking about doing for a long time. It looks good, but kind of washes out the two housings behind, I would probably dim them just a tad.
Sorry you had to sell your car.
Thanks...It doesn't actually if you see the first pic my parking lights weren't on. is just the camera makes it look like that.
09-22-2016, 12:37 AM
