[For Sale] LSx swap partout!! Lots of goodies!!
#1
Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Cali
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
LSx swap partout!! Lots of goodies!!
Well may have my ls1/t56 sold, so I have lots of parts that will be leftover from my swap in my '85 camaro. Parts listed DO NOT include shipping or paypal fees. PM me for faster response and first come first serve
Hawks 1 3/4 Headers with custom 3" collectors (ALSO comes with custom made 4" y-pipe and 4" cutout which was almost $400 to fab) - SOLD
Spohn lsx swap motor mounts w/ engine shell mount and new poly engine mount bushings - SOLD
Hawks double hump crossmember - SOLD
Complete ls1/3rd gen wiring harness made by "Pocket" that was plug-n-play for my '85 camaro (cost me around $475 and you don't have to by a ls1 harness either ) - SOLD
Corvette fuel filter/regulater with braided lines to fuel tank and fuel rail including all necessary AN fitting - SOLD
F-body Battery/Alternator/ground harness - $45
LS1 fans (trimmed on top for shroud to fit) - $100
LS1 Coolant overflow tank - $30
Spohn Tubular Adj. poly end LCA's (SKU 204) - SOLD
(2) 2" billet spacers & (2) 1.5" billet spacers to adapt 4th gen wheels - $100
4th gen Trans Am grey cloth front seats in good condition (pair) - $120
ZR1 Grand Sport wheels (2) 17X11 (2) 17x9 in EXCELLENT condition with NO CURB RASH. Have 315/35/17 rear and 275/45/17 front Goodyear Eagle F1 tires all around. 40% rear and 60% front - $900
Autometer Carbon Fiber Electrical water temp (4737) - $50
Autometer Carbon Fiber Mechanical oil pressure - $40
Autometer 5" Tach (233903) - SOLD
Lokar Throttle body cable - SOLD
Knockoff "flowmaster" muffler single 3"in/3"out that flows pretty well - $60
Up22 4 3/4 Cowl Hood with pin-ons (LOCAL PICKUP) $350
I will update the list as I sell or find more parts. Can send pics if needed.
Hawks 1 3/4 Headers with custom 3" collectors (ALSO comes with custom made 4" y-pipe and 4" cutout which was almost $400 to fab) - SOLD
Spohn lsx swap motor mounts w/ engine shell mount and new poly engine mount bushings - SOLD
Hawks double hump crossmember - SOLD
Complete ls1/3rd gen wiring harness made by "Pocket" that was plug-n-play for my '85 camaro (cost me around $475 and you don't have to by a ls1 harness either ) - SOLD
Corvette fuel filter/regulater with braided lines to fuel tank and fuel rail including all necessary AN fitting - SOLD
F-body Battery/Alternator/ground harness - $45
LS1 fans (trimmed on top for shroud to fit) - $100
LS1 Coolant overflow tank - $30
Spohn Tubular Adj. poly end LCA's (SKU 204) - SOLD
(2) 2" billet spacers & (2) 1.5" billet spacers to adapt 4th gen wheels - $100
4th gen Trans Am grey cloth front seats in good condition (pair) - $120
ZR1 Grand Sport wheels (2) 17X11 (2) 17x9 in EXCELLENT condition with NO CURB RASH. Have 315/35/17 rear and 275/45/17 front Goodyear Eagle F1 tires all around. 40% rear and 60% front - $900
Autometer Carbon Fiber Electrical water temp (4737) - $50
Autometer Carbon Fiber Mechanical oil pressure - $40
Autometer 5" Tach (233903) - SOLD
Lokar Throttle body cable - SOLD
Knockoff "flowmaster" muffler single 3"in/3"out that flows pretty well - $60
Up22 4 3/4 Cowl Hood with pin-ons (LOCAL PICKUP) $350
I will update the list as I sell or find more parts. Can send pics if needed.
Last edited by daddy33; 05-06-2012 at 10:57 AM.
#2
Junior Member
Join Date: Sep 2011
Location: Houston, Texas
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Camaro
Engine: LS6
Transmission: Tick Stage 2 T56
Axle/Gears: Moser 12 Bolt
Re: LSx swap partout!! Lots of goodies!!
That's quite the setup you have there. Too bad my dd broke this weekend or I would take some parts off your hands. Good luck with the sale!
#4
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: LSx swap partout!! Lots of goodies!!
Interested in the lokar throttle cable and would you happen to have a strut tower brace? Just thought Id ask
#5
COTM Editor
iTrader: (22)
Join Date: Mar 2001
Posts: 9,909
Likes: 0
Received 1,857 Likes
on
1,272 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: LSx swap partout!! Lots of goodies!!
I'm surprised the headers and Y-pipe aren't gone already. It is very unusual to find a Y-pipe already made, and especially a nice one like that. GLWS.
#6
Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Cali
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
Re: LSx swap partout!! Lots of goodies!!
Turlock, near Modesto
And sorry, no STB
Daily bump, and a few parts pending sale....
#7
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: LSx swap partout!! Lots of goodies!!
Put me in line for the lokar cable. Do you have a pic of it? It mounts to a stock LS TB and third gen pedal?
Trending Topics
#9
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: LSx swap partout!! Lots of goodies!!
How does it mount to the firewall?
#10
Supreme Member
iTrader: (4)
Re: LSx swap partout!! Lots of goodies!!
That is a SMOKIN deal on the headers and y-pipe... That y-pipe is very similar to what I have, and its fantastic as far as fit and all goes. Assuming it tucks up as high.
If I didnt already have it...Ide be jumping on that like crazy.
Good luck selling things off!
J.
If I didnt already have it...Ide be jumping on that like crazy.
Good luck selling things off!
J.
#11
Junior Member
iTrader: (2)
Join Date: Feb 2008
Location: Middle TN.
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: 2001 ls1
Transmission: built 4l60e with stall
Axle/Gears: 4:10
Re: LSx swap partout!! Lots of goodies!!
Wish I could afford the exhaust system. I spoke with Daddy33 by phone yesterday seems like a good guy wish we lived closer to each other to get my project finished...lol good luck on the sale prices are very fair and he seems to be a very honest guy.
#12
Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Cali
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
Re: LSx swap partout!! Lots of goodies!!
Have it going through a washer type piece of metal, screws from both side so it tightens down pretty snug to the firewall. I'll have pics posted below
Thanks bud, I've been getting a load of PM's about the headers so nobody bit the bullet yet. Actually might have a guy local coming to pick them up.
Thanks man, it was cool chatting with you on the phone too. Good luck on your project.
Pics of the throttle body cable for those interested
That is a SMOKIN deal on the headers and y-pipe... That y-pipe is very similar to what I have, and its fantastic as far as fit and all goes. Assuming it tucks up as high.
If I didnt already have it...Ide be jumping on that like crazy.
Good luck selling things off!
J.
If I didnt already have it...Ide be jumping on that like crazy.
Good luck selling things off!
J.
Pics of the throttle body cable for those interested
#15
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: LSx swap partout!! Lots of goodies!!
still interested in the throttle cable if the guy doesnt take it and also shipping to Canada postal code L5N3K9. Thanks
#18
Guest
Posts: n/a
Re: LSx swap partout!! Lots of goodies!!
Well may have my ls1/t56 sold, so I have lots of parts that will be leftover from my swap in my '85 camaro. Parts listed DO NOT include shipping or paypal fees. PM me for faster response and first come first serve
Hawks 1 3/4 Headers with custom 3" collectors (ALSO comes with custom made 4" y-pipe and 4" cutout which was almost $400 to fab) - SOLD
Spohn lsx swap motor mounts w/ engine shell mount and new poly engine mount bushings - SOLD
Hawks double hump crossmember - SOLD
Complete ls1/3rd gen wiring harness made by "Pocket" that was plug-n-play for my '85 camaro (cost me around $475 and you don't have to by a ls1 harness either ) - SOLD
Corvette fuel filter/regulater with braided lines to fuel tank and fuel rail including all necessary AN fitting - SOLD
F-body Battery/Alternator/ground harness - $45
LS1 fans (trimmed on top for shroud to fit) - $100
LS1 Coolant overflow tank - $30
Spohn Tubular Adj. poly end LCA's (SKU 204) - SOLD
(2) 2" billet spacers & (2) 1.5" billet spacers to adapt 4th gen wheels - $100
4th gen Trans Am grey cloth front seats in good condition (pair) - $120
ZR1 Grand Sport wheels (2) 17X11 (2) 17x9 in EXCELLENT condition with NO CURB RASH. Have 315/35/17 rear and 275/45/17 front Goodyear Eagle F1 tires all around. 40% rear and 60% front - $900
Autometer Carbon Fiber Electrical water temp (4737) - $50
Autometer Carbon Fiber Mechanical oil pressure - $40
Autometer 5" Tach (233903) - SOLD
Lokar Throttle body cable - SOLD
Knockoff "flowmaster" muffler single 3"in/3"out that flows pretty well - $60
Up22 4 3/4 Cowl Hood with pin-ons (LOCAL PICKUP) $350
I will update the list as I sell or find more parts. Can send pics if needed.
Hawks 1 3/4 Headers with custom 3" collectors (ALSO comes with custom made 4" y-pipe and 4" cutout which was almost $400 to fab) - SOLD
Spohn lsx swap motor mounts w/ engine shell mount and new poly engine mount bushings - SOLD
Hawks double hump crossmember - SOLD
Complete ls1/3rd gen wiring harness made by "Pocket" that was plug-n-play for my '85 camaro (cost me around $475 and you don't have to by a ls1 harness either ) - SOLD
Corvette fuel filter/regulater with braided lines to fuel tank and fuel rail including all necessary AN fitting - SOLD
F-body Battery/Alternator/ground harness - $45
LS1 fans (trimmed on top for shroud to fit) - $100
LS1 Coolant overflow tank - $30
Spohn Tubular Adj. poly end LCA's (SKU 204) - SOLD
(2) 2" billet spacers & (2) 1.5" billet spacers to adapt 4th gen wheels - $100
4th gen Trans Am grey cloth front seats in good condition (pair) - $120
ZR1 Grand Sport wheels (2) 17X11 (2) 17x9 in EXCELLENT condition with NO CURB RASH. Have 315/35/17 rear and 275/45/17 front Goodyear Eagle F1 tires all around. 40% rear and 60% front - $900
Autometer Carbon Fiber Electrical water temp (4737) - $50
Autometer Carbon Fiber Mechanical oil pressure - $40
Autometer 5" Tach (233903) - SOLD
Lokar Throttle body cable - SOLD
Knockoff "flowmaster" muffler single 3"in/3"out that flows pretty well - $60
Up22 4 3/4 Cowl Hood with pin-ons (LOCAL PICKUP) $350
I will update the list as I sell or find more parts. Can send pics if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
10
11-16-2015 01:13 PM