nice goat!

do you guys have these videos in a third gen channel on youtube? i'd love to just pop up the channel and watch them all then subscribe to the channel so i get emailed when you post new ones

 

How to Install Replace Center Console Chevy Camaro Iroc-Z 82-92

 

How to Install Replace Dash Pad Chevy Camaro Iroc-Z 82-92 1AAuto.com

 

Subcribed!!

 

1ATony,
Tell Mike Thanks for doing the hatch pull down!!
After watching the vid, I was able to adjust our hatch to pull down to hear the click!!
Hopefully this will fix the battery drain since the hatch is now able to fully cycle!!

 

You're welcome. Thanks for checking out our videos.

 

How To seperate the Headlight Mounting Panel From The front Nose Camaro IROC-Z

 

How to Remove rear Bumper Cover Chevy Camaro IROC-Z

 

How to Remove rear Ground Effects and Spoiler 1986 Chevy Camaro IROC Z

 

How to remove T-Top Roof Weatherstrip Channels Chevy Camaro IROC-Z 1986

 

How To Remove Rear Hatch Glass from Panel Chevy Camaro IROC-Z

 

How To remove Air Intake Grille Bezel Chevy Camaro IROC-Z

 

subscribed!!

 

Whatever happened to this 1A Auto project car?? I thought we were going to see the whole care being restored. Anymore updates since September 2nd?

 

subscribed

 

ya, I would love to see some progress, but as a shop I am sure they are busy. Just don't forget about us!

 

Actually talked to Mike yesterday about it. We should be getting it painted shortly.

Then we'll put it back together. Plus I recommended a couple of other videos that we do on the car before we sell it.

 

Subscribing.

 

These videos have been a really big help over the last few weeks...I'm just glad that you guys took the time to video this stuff for us......

 

Id be scared to look under that dash............

 

anything back yet?

 

Was wondering if you planned on doing any suspension videos? i think videos of doing the springs would be very helpful.

 

i just wish they would update, and i agree, suspention and how to install the new weatherstripping would be nice.

 

installing weatherstripping is about the easiest thing in the world to do. they need to focus on a weatherstripping kit that isnt as much what you can get a thirdgen for
maybe you should look a little closer as well http://www.youtube.com/watch?v=BJrsS...layer_embedded

 

I know it's easy but there are those odd things that come up, like me. I'm about to do all new weather stripping on my car, on the stripping that goes around the bottom of the door, how is that held on??? I don't have a clue

 

subscribe

 

little pins. use a prybar and pop them out

 

Sell it? Boo Hiss!

 

i say keep it and start offering aftermarket parts? so then you have more options for thirdgens than just oem stuff, then itll be a one stop shop for thirdgen parts

 

I agree with this ......

And
We would love to see a replacement dash pad that we don't have to take out a loan to buy it!!!!

 

hell yes, cheap dash pad, hell fiberglass exact fit repos would be great as well. i think in the perspective of operating a company expansion is always good. and as we know there is a market for parts for these cars. thats how businesses like hawks and stuff started thier business. also 1aauto is involved in this forum so they know directly what we want or are outraged about price wise, so all in all they have ears and eyes in the proper places to ensure that people go to almost only one place to buy just about everything they want or need within reason. just a thought, rant off

 

hey guys, we haven't abandoned this project yet! Mike's hard at work on shooting videos for a few other cars, so this one's been put aside for a bit. However, there will be more videos to come.

 

have you guys touched on how to remove door locks and hatch lock cylinders? mightve missed it if so

 

sub

 

@ the 1A auto guys, thnx a lot for those videos.

With those I could just watch vid, walk up to my car and get the stuff done in a few minutes that would have taken me hours in finding bolt/screw/washer/fastener locations otherwise.

 

Really enjoy all the 1a auto videos.. I'd love to see one on how to replace the floor pans in our cars. Also, maybe a how to vid on changing out the front struts. We tend to do a lot of our own work on our cars, and when you guys do a video on how to replace window sweeps, it is SO helpful. Thanks guys! Stone

 

You're welcome.

 

Any new vids coming soon?

 

 

Great videos, really looking forward to seeing more. Thanks 1A

 

Been a year since the last video. I am not holding my breath for new ones. But, you never know.

 

Subcribed!!

 

subscribed!