Caravan To The Picnic?
Thread Starter
Member
Joined: Nov 1999
Posts: 307
Likes: 0
From: Bel Air, MD USA
Car: 1969 Chevelle SS 396
Caravan To The Picnic?
Anyone interested in caravanning to the picnic at North Point Park Saturday?
So far, myself and 2 other third gens (Joe & Debbie, weather permitting) are meeting at the park n ride near IKEA at the White Marsh Mall around 11:00. It's about a 20 minute drive to North Point Park from White Marsh Mall.
Post here if you are interested.
So far, myself and 2 other third gens (Joe & Debbie, weather permitting) are meeting at the park n ride near IKEA at the White Marsh Mall around 11:00. It's about a 20 minute drive to North Point Park from White Marsh Mall.
Post here if you are interested.
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
id be interested but i dont know if thats outta my travel or not or where exactly your at? id be comming down I-68 to I-70 & then from there im not sure yet....lol....
Thread Starter
Member
Joined: Nov 1999
Posts: 307
Likes: 0
From: Bel Air, MD USA
Car: 1969 Chevelle SS 396
Originally posted by camarogirl18
id be interested but i dont know if thats outta my travel or not or where exactly your at? id be comming down I-68 to I-70 & then from there im not sure yet....lol....
id be interested but i dont know if thats outta my travel or not or where exactly your at? id be comming down I-68 to I-70 & then from there im not sure yet....lol....
If you go towards Towson, get off at the exit for Rt 43 towards White Marsh Mall. Follow to Honeygo BLVD and make a right (towards the mall) and follow the park n ride signs.
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
Originally posted by 87WhiteROC
That depends on which way you will come around the Baltimore Beltway at the end of I-70.
If you go towards Towson, get off at the exit for Rt 43 towards White Marsh Mall. Follow to Honeygo BLVD and make a right (towards the mall) and follow the park n ride signs.
That depends on which way you will come around the Baltimore Beltway at the end of I-70.
If you go towards Towson, get off at the exit for Rt 43 towards White Marsh Mall. Follow to Honeygo BLVD and make a right (towards the mall) and follow the park n ride signs.
Thread Starter
Member
Joined: Nov 1999
Posts: 307
Likes: 0
From: Bel Air, MD USA
Car: 1969 Chevelle SS 396
Originally posted by camarogirl18
do you have an address to either the mall or park & ride or something close to the park & ride? that way i can mapquest it & see what i can come up with.
do you have an address to either the mall or park & ride or something close to the park & ride? that way i can mapquest it & see what i can come up with.
IKEA Baltimore 8352 Honeygo Blvd.
Baltimore, MD 21236
IKEA is the closest building to the park n ride. Hope this helps.
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
Originally posted by 87WhiteROC
Here's IKEA's address:
IKEA Baltimore 8352 Honeygo Blvd.
Baltimore, MD 21236
IKEA is the closest building to the park n ride. Hope this helps.
Here's IKEA's address:
IKEA Baltimore 8352 Honeygo Blvd.
Baltimore, MD 21236
IKEA is the closest building to the park n ride. Hope this helps.
http://www.mapquest.com/directions/m...more&2s=md&2z=
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
Yea I will do it... we could talk to the guys friday see if there up for it.
Trending Topics
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
Directions are correct but once you get off 43 stay to the right and take the little off ramp on the right side. You will see the park-n-ride. I have attached a crapy picture to show what I mean. Yellow is the park-n-ride and the black line is the off ramp you need to take instead of going straight.
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
is this on the way if i am coming from the dc area?
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
Originally posted by crrllmich
Directions are correct but once you get off 43 stay to the right and take the little off ramp on the right side. You will see the park-n-ride. I have attached a crapy picture to show what I mean. Yellow is the park-n-ride and the black line is the off ramp you need to take instead of going straight.
Directions are correct but once you get off 43 stay to the right and take the little off ramp on the right side. You will see the park-n-ride. I have attached a crapy picture to show what I mean. Yellow is the park-n-ride and the black line is the off ramp you need to take instead of going straight.
can you PM me a cell phone number in case i get lost? also what you name is? lol
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
My names Mike his is Rick I don't carry cell phones but Rick might haveone.
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
No problem
-----------------------------------------------
O come on rick why not post it on here...
no need to be shy I was just gonna submit it to Hondas Anonymous.
"Hello?"
"Hello this is Hondas Anonymous calling we recieved your submission"
"I dont have a honda"
"Denial is a very bad thing rick....ITS NOT OK!"
Just kidding
-----------------------------------------------
O come on rick why not post it on here...
"Hello?"
"Hello this is Hondas Anonymous calling we recieved your submission"
"I dont have a honda"
"Denial is a very bad thing rick....ITS NOT OK!"
Just kidding
Last edited by crrllmich; Sep 22, 2005 at 09:17 AM.
Thread Starter
Member
Joined: Nov 1999
Posts: 307
Likes: 0
From: Bel Air, MD USA
Car: 1969 Chevelle SS 396
Originally posted by crrllmich
No problem
-----------------------------------------------
O come on rick why not post it on here...
no need to be shy I was just gonna submit it to Hondas Anonymous.
"Hello?"
"Hello this is Hondas Anonymous calling we recieved your submission"
"I dont have a honda"
"Denial is a very bad thing rick....ITS NOT OK!"
Just kidding
No problem
-----------------------------------------------
O come on rick why not post it on here...
"Hello?"
"Hello this is Hondas Anonymous calling we recieved your submission"
"I dont have a honda"
"Denial is a very bad thing rick....ITS NOT OK!"
Just kidding
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
HAHA np anytime!...
Im gonna bring the camara from work so I can get some pics. I presume Rick you will bring yours too? Make sure we have LOTS of pictures hehe.
Im gonna bring the camara from work so I can get some pics. I presume Rick you will bring yours too? Make sure we have LOTS of pictures hehe.
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
should i bring my own camera? or do you think there will be enough people posting pictures where I wont need one.
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
shoot, my dad grounded me cause i got a 75 on a test and now he thinks i wont get into college
but my mom says shell cover for me cause hell be working. id rather go to this and be grounded for a while then just be grounded for the weekend and miss it.
but my mom says shell cover for me cause hell be working. id rather go to this and be grounded for a while then just be grounded for the weekend and miss it. Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
Well show was nice today gonnabe awesome tommorow...cya guys there!
Senior Member
Joined: Jun 2003
Posts: 615
Likes: 0
From: sparrows point md
Car: 87 gta 89 ta
Engine: 5.0 5.7
Transmission: 700r4 x2
Originally posted by ZZ4 86 Z28
shoot, my dad grounded me cause i got a 75 on a test and now he thinks i wont get into college
but my mom says shell cover for me cause hell be working. id rather go to this and be grounded for a while then just be grounded for the weekend and miss it.
shoot, my dad grounded me cause i got a 75 on a test and now he thinks i wont get into college
but my mom says shell cover for me cause hell be working. id rather go to this and be grounded for a while then just be grounded for the weekend and miss it. Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
yea i cant go out tomorrow, lol. good seeing you, and everyone else, too.
Thread
Thread Starter
Forum
Replies
Last Post




