88 Monte Carlo Ls 406/trade for 3rd Gen?
Thread Starter
Member
Joined: Apr 2004
Posts: 248
Likes: 0
From: Des Plaines IL
Car: 1991 Camaro
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3:42
88 Monte Carlo Ls 406/trade for 3rd Gen?
406 sbc,barry grant carb, hooker headers, the exhaust is 3.5 inch all the way back. 7.5 373 posi rear end, new rear brakes. Rebuild tranny with RV shift kit in it. Lowered 2 inchs in the front, drop spindles and springs. 3.5 inch cowl hood. Paint is rough but workable u can see it in the pics. Passenger side door is dented but repairable. Good tread on all tires and good brakes up front back are brand new. Engine only has 4000 miles on it the tranny has 500 miles and the rear has a little over 7000 miles on it. Sony head unit and 6x9's in the back and the front tweeters are Pioneers.
THE BODY HAS MINOR RUST STARTING ON BOTH LEFT AND RIGHT QUARTER PANELS AROUND THE REAR WHEELS. LEFT DOOR HAS SOME RUST AT THE VERY BACK EDGE AND HAS HAD SOME AMATUER REPAIRS DONE TO REPAIR SOME SCRATCHES FLOORS AND FRAME ARE REAL SOLID. SEAT ARE CLOTH AND HAVE A FEW SINGES FROM A PREVIOUS OWNER.
wHEELS ARE 15 X 8' VETTE AND I BELIVE THE STEERING WHEEL IS REMOVABLE
ran 12.9s last year without the posi so who knows now! Asking $2900 takes it from me! small oil leak on rightside valve cover due to stud snapped but easy fix!!! or trade for a 86-89 Iroc w/ T-tops and good runner w/ t-tops perfer! If not let me know what third gen you may have and Id be willing to trade!!!! email me at phatss97@yahoo.com if intrested Thanks!
THE BODY HAS MINOR RUST STARTING ON BOTH LEFT AND RIGHT QUARTER PANELS AROUND THE REAR WHEELS. LEFT DOOR HAS SOME RUST AT THE VERY BACK EDGE AND HAS HAD SOME AMATUER REPAIRS DONE TO REPAIR SOME SCRATCHES FLOORS AND FRAME ARE REAL SOLID. SEAT ARE CLOTH AND HAVE A FEW SINGES FROM A PREVIOUS OWNER.
wHEELS ARE 15 X 8' VETTE AND I BELIVE THE STEERING WHEEL IS REMOVABLE
ran 12.9s last year without the posi so who knows now! Asking $2900 takes it from me! small oil leak on rightside valve cover due to stud snapped but easy fix!!! or trade for a 86-89 Iroc w/ T-tops and good runner w/ t-tops perfer! If not let me know what third gen you may have and Id be willing to trade!!!! email me at phatss97@yahoo.com if intrested Thanks!
Supreme Member
iTrader: (1)
Joined: Feb 2003
Posts: 1,122
Likes: 1
From: THE QUADS
Car: FBODYS
Engine: ALWAYS 8'S
Transmission: ALWAYS MENTAL
Axle/Gears: RUSTY AND BRAND NEW
Those are even easier to work on than our cars. I remember doing drivtrain swaps in one night even under the influence. Then going to the track the next day!
Trending Topics
Thread Starter
Member
Joined: Apr 2004
Posts: 248
Likes: 0
From: Des Plaines IL
Car: 1991 Camaro
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3:42
[IMG]
http://i46.photobucket.com/albums/f130/pinkpantiedropper/sidemotor406.jpg[/IMG]
here are some more pics! Any questions please feel free to Pm me Thanks
Member
Joined: May 2005
Posts: 162
Likes: 0
From: ohio
Car: 88 camaro drop top custom
Engine: turbod lt1
Transmission: t56
id be very intrested but i all i got is a 91 rs 305 tbi with only 103k, very clean car. Auto, ttops, Black, very clean interior and have some parts u could have with it if intrested. let me know
Thread
Thread Starter
Forum
Replies
Last Post