I'm looking for a ALDL Cable under $50 shipped...

*Must be compatible with the 1228746 ECM

 

B^U^M^P

 

The daily bump, anyone?

 

I have never used them but heard it works. You can email them and ask about $61 mask.
its $55 and has the 10k mode switch. I can’t recall if your ecm needs the use to get the dataflow or not.
I like the moates.net extreme aldl cable.

http://www.1320electronics.com/12pinALDLUSB.html

 

I saw that one on eBay for $55 + $5.95 expedited shipping w/ $3 Off. Took a chance and ordered it. Moates had a back order though like 04/30/2019...

 

Hope it works as described. Here is a link to the adx you need to communicate to your ecm.
http://www.gearhead-efi.com/Fuel-Inj...Information-61

 

I've downloaded the 61.adx, and I'm about to prep a laptop I have laying around. Is that .adx file specific to TunerPro/RT or can it be used with any data logging software?

 

Adx is specific to tuner pro.

 

Just downloaded TunerPro and upon launch I get msvcr100.dll and msvcr120.dll missing. After clicking ok twice the software opens but it seems as if it's not going to work. Btw, for datalogging will I need the paid version?

 

You onto need to pay for it, Its a donation to help with the development of tuner pro.
without paying for it there is a timer after you launch the program to delay its use. All the functions are there.

 

just curious did the 1320electronicsinc cable worked out? It says bluetooth did it work?

 

I ordered the basic one, and it works like a champ! John W (Owner) is also a good guy, hell help you get all set up and running.