RedGut86

Ok, I am usually over at corvetteforum.com for posting for help on my 86 Y-body. But I have some parts you guys might be more interested in. If you want to talk to people I have had deals with just search for USAsOnlyWay or I can provide references.

Also, if you want pictures of anything, just ask me for them !

Anyway, I have:


MSD-8876 Adapter Harness
http://store.summitracing.com/defaul...&part=MSD-8876
$27.88
And a MSD Gm Blaster coil...MSD-8226
44.88$ (I, personally have never used this, but it has been used)

Make an offer!

--------------------------
Brand New! Unopened GM Head Gaskets for 88-91, ZZ4 motors, and for swapping 113 D-port heads onto earlier L98s as per John Lingenfelter's book on building SBCs
The pair of them:
#12557236
17.45$ apiece from Superior
Make offer
-----------------------------------------



-------------------------------
Unopened Moroso Valve Cover hold down tabs, so for those thin valve covers you don't have to worry about warping and not making a good seal:
MOR-68510 8.95/pack of 4
2-packs unopened
Make Offer
----------------------


----------------------------
-----Summit 7qt Circle Track Pan w/ pickup
(This can be used on any 2-piece w/driver's side dipstick)
#1210002 119.99
pickup:
#121101 18.99

Used for 400 miles.
Painted red/orange.
Will include pan rails if wanted.
Basically brand new.

I know of some who have had great success with this pan on the street and drag racing. Just don't use the pickup I have listed here unless you are going to be circle track racing, in which case, this pickup is perfect.
Make offer


----------------------
400 (or 383) flexplate SFI certified
163 tooth
Used, but barely and in great shape
Make offer


Thanks for looking!
Now make me an offer!

RedGut86

I also have some Moroso chrome valve covers, let me know if anyone is interested in those. I don't believe they have been used before, not sure though. Look new.

http://img.villagephotos.com/p/2005-7/1054060/v3.jpg
http://img.villagephotos.com/p/2005-7/1054060/v2.jpg
http://img.villagephotos.com/p/2005-7/1054060/v1.jpg


Also, I am located in Washington.

87377iroc

do you accept paypal? hows 30 shipped on the head gaskets?

RedGut86

Paypal is fine.

Send me a PM on your location.
I think 30$ shipped should be fine.

RedGut86

One more thing I forgot.

I don't know if you guys can use a 10.75"/26spline clutch/pp. But if you can, I have one that was barely used and babied for break in (~500-1k miles) then swapped out when I put in my stroker.

RedGut86

w1964bgta

I read you accept pay pal hows $15 shipped to 48507
don't know how it would work with this site or what would happen in general to complete purchase if you accept offer

chickenhawk

How is 30 + shipping for both, I can send via paypal

Regards,

Matt

RedGut86

PMs sent to both of ya!