Where would the schrader valve be on an 89 TBI camaro? I was looking and couldnt find one. Or where could i hook up to fuel? Also is there any way to incorperate an aftermarket schrader valve into the hard fuel line?

 

No shrader valve on them unfortunately . I'm cutting the rubber fuel line and putting a T in it to run to the nitrous solenoid. The TBI system runs at a low pressure, so hose clamps should do the trick (or so I hear, we should find out soon enough!).

Tony

 

where would i get a tee for the fuel line and a -4an for the line to the solenoid? Also what size is the rubber fuel line?

 

I got most of the components for the T-line from Home Depot. They have brass pipe fittings, get a female T junction, then get two hose barbs (I think it's 1/8") for the sides. The top of the T needs an adapter from pipe thread to AN fittings. I got this at my local speed shop for like $3.00. As far as sealing it off, I'm pretty sure you don't need any sort of sealant on the threads, but don't quote me on this, like I said before, the TBI system runs at a fairly low pressure (<20 psi)

Tony

 

well i just bit the bullet last night and purchased the $559 TBI n.o.s. kit. It will be here tomorrow. Ill see if i cant get some pics or at the least some info on this. Do you have any pics of your kit?

 

I'll get some up fairly soon, just gotta dig some sheez out of the garage.

 

you're going to love when you get to the part of the install and it tells you to cut one of the lines to install a Tee..... :lala:

 

well i figured that much. I just didnt want to go parts hunting and make like 4-5 trips for things that i come across alter. I would just as much want to have the COMPLETE kit sitting there and with all of the parts.