ok guy my 350 is going to have at least a 10:1 CR and its going to be a mainly n/a motor but i definitely want to spray while im at the track. would it be safe to run say a 50 shot? these are cast pistons too

 

yes, with proper safety stuff(low fuel press cut-off, window switch etc.)

 

thanks man

 

get you a wideopen throttle switch and wire everyting correct and you can spray 100 all day and 150 occasionaly...

 

I agree, 50hp you can barely feel in a decent v8.

 

you'll get bored of 50HP really quick. There is no set point as to where a motor will blow up... Nitrous won't kill your motor detonation or too much power for the parts will. So long as your tune is good your motor will easily survive a 150 shot ...unless you're already making a ton of HP on those cast parts...

 

Make sure you have a good tune on the car and 150 won't be a problem. Pull timing, run 2 step colder plugs, good gas, and read the plug after a run.

 

hey man i have a question, im going to probably put a 100shot on my 305 TPI but i just need to know that it will be safe so i dont blow my motor..can u give me some tips on doin this...THANKS...

Nick

 

Search my name,

so far, so good with me.