Hooker LS turbo Manifold S475 build thread
#51
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Hooker LS turbo Manifold S475 build thread
Sorry about that little break I had there. Laundry room project is taking my life over!
Waiting on the wastegate flanges for this kit to ship to me, then the guy is sending me his turbo as well so I can fabricate some if the cold side as well.
I think this non ac style is my favorite to build. Simple yet tests my skills in the tight area. Had a hell of a time getting my #18 cup in. Had to switch to a #12 to finish it off.
Jay
Waiting on the wastegate flanges for this kit to ship to me, then the guy is sending me his turbo as well so I can fabricate some if the cold side as well.
I think this non ac style is my favorite to build. Simple yet tests my skills in the tight area. Had a hell of a time getting my #18 cup in. Had to switch to a #12 to finish it off.
Jay
#53
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Hooker LS turbo Manifold S475 build thread
Yes havent been chiming in here much. I have 2 non-ac kits ready to go basically. Starting on another non-ac kit for myself or the shelf then i have 1 more AC kit tacked up. Been talking with a member here for it just want to line everything up perfectly.
Ill get some more photos of these kits after coating as well. Ill be switching my setup to the same one, selling my old setup and even going to the new terminator X holley setup. So there will be some more updates to come shortly.
Jay
Ill get some more photos of these kits after coating as well. Ill be switching my setup to the same one, selling my old setup and even going to the new terminator X holley setup. So there will be some more updates to come shortly.
Jay
#54
Junior Member
Join Date: Dec 2018
Location: Tennessee
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro RS
Engine: 5.3 LM7
Transmission: T56
Re: Hooker LS turbo Manifold S475 build thread
Yes havent been chiming in here much. I have 2 non-ac kits ready to go basically. Starting on another non-ac kit for myself or the shelf then i have 1 more AC kit tacked up. Been talking with a member here for it just want to line everything up perfectly.
Ill get some more photos of these kits after coating as well. Ill be switching my setup to the same one, selling my old setup and even going to the new terminator X holley setup. So there will be some more updates to come shortly.
Jay
Ill get some more photos of these kits after coating as well. Ill be switching my setup to the same one, selling my old setup and even going to the new terminator X holley setup. So there will be some more updates to come shortly.
Jay
Decided to stick with the LS over the 2JZ swap huh? Nice.
#55
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Hooker LS turbo Manifold S475 build thread
PM sent.
Wells till have all the 2jz stuff but i dont know at this point. I have like 7k in 2JZ parts just collecting dust. Could buy myself a nice forged motor for that..
Jay
Wells till have all the 2jz stuff but i dont know at this point. I have like 7k in 2JZ parts just collecting dust. Could buy myself a nice forged motor for that..
Jay
#56
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Hooker LS turbo Manifold S475 build thread
Another AC kit that's potentially spoken for.
#57
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Hooker LS turbo Manifold S475 build thread
Bought myself a hooker setup as well. Fitment is fantastic.
Also modified the Holley/ls3 stat.
Jay
Also modified the Holley/ls3 stat.
Jay
#59
Senior Member
Re: Hooker LS turbo Manifold S475 build thread
I'll take a non AC kit for sure. Whenever you've got some ready to go that is
#63
Senior Member
Re: Hooker LS turbo Manifold S475 build thread
#65
Senior Member
Re: Hooker LS turbo Manifold S475 build thread
They fit great. That's the passenger side where the turbo mount would be. The crossover tucks up nice
The following users liked this post:
Speed Racer (05-18-2021)
#67
Senior Member
Re: Hooker LS turbo Manifold S475 build thread
I'm going 5" out the fender. Haven't decided whether I'm gonna go out and down thru the battery tray or behind the strut tower
The following users liked this post:
Speed Racer (06-28-2021)
Thread
Thread Starter
Forum
Replies
Last Post