I am considering selling all my s/c components. The setup would include...Custom brackets, made with 1/2" 6061 aluminum, Custom aluminum pulley setup with cogs for the supercharger, Vortech Y/S-trim (brand new polished unit) with flow matched air/water intercooler by Spearco. I have all the belts, tensioners, idlers, etc... to setup and run. I will not include piping, due to the many diferent intake setup's out there. Anyone interested can e-mail me with Serious offers. Pics are available to those interested, pics can also be seen on this board "Dropped the motor in this weekend"

 

am I the only one who is wondering why in gods name you would want to do that....?????!!!!!!

 

 

i've got an idea why but i'm not at liberty to say

 

Which one is the y/s trim? how much boost does it put out? It's a possibility I'd be interested.....

Jon

 

the Y/S-trim is capable of pushing 1500cfm and able to support 1000hp. It is rated for up to 29psi. The pulley combination i have will make about 20psi, which can be changed by installing a larger blower pulley. In comparison to the Vortech lineup it is larger than a T-trim but smaller than the x-trim. comparing it to a Procharger, it is between the d1 and the d1r. Hope that makes sense. Don B.

 

Don,if your thinking about doing something that is going to delay your getting to the track in april,stop it right now....unless your going with another style power adder,one that requires lots of welding,exhaust fabrication,many late nights in the garage...if so,let me know,i'll take some time and give you a hand,if you want!
Later,John.

 

There you go Don.
Dont turn down offered help to build uhm... exhaust.

 

TURBO


There is just something about the free boost a turbo offers. It turns us men crazy.