will 13 in baer track kit fit stock 16 inch wheels
Thread Starter
Junior Member
Joined: Nov 2001
Posts: 69
Likes: 0
From: Camden, sc usa
will 13 in baer track kit fit stock 16 inch wheels
Upgrading brakes.
Will the 13 inch Baer Track kit fit stock 16 inch wheels on a 91 Z28.
I will also measure with the template.
Two calls to Baer one yes one no.
TPIS catalogue lists wheels that do not fit. Mine are not listed.
Any help appreciated
Will the 13 inch Baer Track kit fit stock 16 inch wheels on a 91 Z28.
I will also measure with the template.
Two calls to Baer one yes one no.
TPIS catalogue lists wheels that do not fit. Mine are not listed.
Any help appreciated
Junior Member
Joined: Jul 2000
Posts: 94
Likes: 0
Baer has a template you can download and use to make sure that it will fit. Here you go
http://www.baer.com/template_lists/gm_f_body.shtm
http://www.baer.com/template_lists/gm_f_body.shtm
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 1,387
Likes: 0
From: Northern NJ
Car: 89 Formula / 09 G8
Engine: LS1 / LS3
Transmission: M6 / M6
Axle/Gears: 3:42 / 3:27
Double check the dimension when you use the template. I did it in a rush and my rims didn't fit. A rather expensive mistake. By the way, I had the deep dish WS6 rims.
Member
Joined: Nov 1999
Posts: 442
Likes: 1
From: Albuquerque NM
I have the pontiac 16 inch aluminum wheels (1990 )
and the 13 inch kit won't go...
The template asks for 7.72 inches from the center
of the hub to the farthest edge of the caliper
The template for the 12 inch kit indicates
that it will work but is close....
The template asks for 7.22 inches from the center
of the hub to the farthest edge of the caliper
and the 13 inch kit won't go...
The template asks for 7.72 inches from the center
of the hub to the farthest edge of the caliper
The template for the 12 inch kit indicates
that it will work but is close....
The template asks for 7.22 inches from the center
of the hub to the farthest edge of the caliper
Thread
Thread Starter
Forum
Replies
Last Post
