Answer this pls: What car did this caliper come off of??
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Answer this pls: What car did this caliper come off of??
It's a PBR rear caliper, yes, but from what??? Check out the "funny" e-brake lever.
Ed
Ed
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Corvette again, huh? Lemme guess...won't work on a F-body. I at least know the bleeder screw and brake hose hole are reversed; other than that, I haven't compared it to those on my car.
Ed
Ed
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Revisiting an old topic:
To save a bit of time trying to figure how to make these work, anyone need a set of good condition 'Vette rear calipers? I have rebuild kits to go with 'em. I'd like to trade for Camaro rear alum calipers for my next 9 bolt or just sell them.
Thanks...
Ed
To save a bit of time trying to figure how to make these work, anyone need a set of good condition 'Vette rear calipers? I have rebuild kits to go with 'em. I'd like to trade for Camaro rear alum calipers for my next 9 bolt or just sell them.
Thanks...
Ed
Trending Topics
Thread Starter
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Ron, a 2 piston REAR caliper? If they have those that's news to me.
ED
ED
Member
Joined: Sep 2002
Posts: 238
Likes: 0
It could possibly be from a Ford or a Dodge also......
Stangs and Vipers ran the same type caliper as the GM counterparts, with some small but significant differences. But there is no reason why it would not work on an F-body. The anchor bracket is the critical part of this equation!!! The calipers are the pretty much the same.
Stangs and Vipers ran the same type caliper as the GM counterparts, with some small but significant differences. But there is no reason why it would not work on an F-body. The anchor bracket is the critical part of this equation!!! The calipers are the pretty much the same.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM