question on subframe connectors

Reply Subscribe

Thread Tools

Search this Thread

Apr 10, 2011 | 08:35 AM

91-RS

Thread Starter

Junior Member

iTrader: (2)

Joined: Dec 2010

Posts: 25

Likes: 0

From: PITTSBURGH PA

Car: 91 RS

Engine: BUILT 327

Transmission: 700R4

Axle/Gears: 3:73

question on subframe connectors

i just got my jegs bolt in connectors. my question is, 1 bar is perfectly straight and the other bar has 2 bends in it. should it be bent? and it appears it is the pass side 1?tia

Apr 10, 2011 | 09:18 AM

DJP87Z28

Supreme Member

Joined: Mar 2003

Posts: 4,771

Likes: 15

From: Florida

Car: 1987 Black IROC-Z (SOLD)

Re: question on subframe connectors

Yes, the passenger side needs clearance for the exhaust & cat. Also make sure you weld those bolt on SFC's sooner then later.

Apr 10, 2011 | 10:40 AM

91-RS

Thread Starter

Junior Member

iTrader: (2)

Joined: Dec 2010

Posts: 25

Likes: 0

From: PITTSBURGH PA

Car: 91 RS

Engine: BUILT 327

Transmission: 700R4

Axle/Gears: 3:73

Re: question on subframe connectors

thanks DJ. anyone have pics of these mounted?

Apr 10, 2011 | 11:51 AM

Project 3.4 Camaro

Supreme Member

Joined: Jul 2009

Posts: 2,615

Likes: 5

From: PA

Car: 1996 Camaro, 1985 Camaro

Engine: 3.8, 3.4

Transmission: WC T5, 700r4

Axle/Gears: 3.23(?), 3.42

Re: question on subframe connectors

Quote:

Originally Posted by DJP87Z28

Yes, the passenger side needs clearance for the exhaust & cat. Also make sure you weld those bolt on SFC's sooner then later.

What he said, they are almost always different for left/right side of car, also do not bolt them in, weld them in, the problem with bolting them in is that you're bolting them into sheet metal, the bolts can eventually start to tear into the metal.