key is stuck to the on position (help)
key is stuck to the on position (help)
I start my formula and I cannot turn it off.. I have to hold the brake and release the clutch in order to shut the motor down.
New ignition? How do I get into the steering column? Need help.
thanks, ken
New ignition? How do I get into the steering column? Need help.
thanks, ken
Friend of mine had the same problem. The key would be a pain to get out. She would sit there for like 10 minutes before she could pry it out and she thought it was something big, but what it turned out to be was the key itself. It was worn down just enough that it would catch coming back from the on position. She couldn't find her keys so she used the spare and it just slipped right out. Funny how something so frustrating like this could be something so small. Hopefully it helps.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: key is stuck to the on position (help)
Originally posted by kengallie
I start my formula and I cannot turn it off.. I have to hold the brake and release the clutch in order to shut the motor down.
New ignition? How do I get into the steering column? Need help.
thanks, ken
I start my formula and I cannot turn it off.. I have to hold the brake and release the clutch in order to shut the motor down.
New ignition? How do I get into the steering column? Need help.
thanks, ken
https://www.thirdgen.org/techbb2/sho...t=key+ignition
RBob.
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
MY old 84 had the same problem...I had to replace the whole steering column...good thing one of my buddies had an extra IROC laying around.
Thread
Thread Starter
Forum
Replies
Last Post
Gunner242
Electronics
7
Dec 25, 2015 04:49 PM
Linson
Auto Detailing and Appearance
12
Oct 1, 2015 09:50 PM





