L98 CAM???
Thread Starter
Junior Member
Joined: Mar 2000
Posts: 67
Likes: 0
From: BUCKHANNON,WV,USA
L98 CAM???
ok i was given a stock l98 cam,i was wondering if anyone had put this cam in the Lo3 and if they could tell me the specs on it,also bolting on a weiand excelerator intake with the stock tbi unit,porting my heads,headers,and a set of 3.42 gears with an auburn pro series posi unit....any info on this setup would be helpfull 
Supreme Member
Joined: Jul 1999
Posts: 1,431
Likes: 1
From: Huntsville, AL
Car: '00 Chevrolet Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
There were three different cams put in the 350 F-bodies (I'm not sure if these cams match up with the L98 'vettes). They're all pretty mild.
<TABLE ALIGN=CENTER BORDER=1>
<TR>
<TD>Year</TD>
<TD>Part #</TD>
<TD>Lift</TD>
<TD>Duration</TD>
<TD>LSA</TD>
</TR>
<TR>
<TD>87</TD>
<TD>14093643</TD>
<TD>.404/.415</TD>
<TD>202/207</TD>
<TD>114.5</TD>
</TR>
<TR>
<TD>88-89</TD>
<TD>10066049</TD>
<TD>.415/.430</TD>
<TD>207/213</TD>
<TD>117.0</TD>
</TR>
<TR>
<TD>90-92</TD>
<TD>10111773</TD>
<TD>.413/.428</TD>
<TD>202/207</TD>
<TD>114.5</TD>
</TR>
</TABLE>
-Mark W.
'88 SC Camaro w/ 305 TBI
[This message has been edited by Mark305TBI (edited January 31, 2001).]
<TABLE ALIGN=CENTER BORDER=1>
<TR>
<TD>Year</TD>
<TD>Part #</TD>
<TD>Lift</TD>
<TD>Duration</TD>
<TD>LSA</TD>
</TR>
<TR>
<TD>87</TD>
<TD>14093643</TD>
<TD>.404/.415</TD>
<TD>202/207</TD>
<TD>114.5</TD>
</TR>
<TR>
<TD>88-89</TD>
<TD>10066049</TD>
<TD>.415/.430</TD>
<TD>207/213</TD>
<TD>117.0</TD>
</TR>
<TR>
<TD>90-92</TD>
<TD>10111773</TD>
<TD>.413/.428</TD>
<TD>202/207</TD>
<TD>114.5</TD>
</TR>
</TABLE>
-Mark W.
'88 SC Camaro w/ 305 TBI
[This message has been edited by Mark305TBI (edited January 31, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
