Ok os I have a 89 305 tbi and I can't get the injectors to start firing and I know that I have fuel presser all the way up and I changed ingenious model and the ecu need help with this

 

do you have loss of spark as well?

 

No I still have spark

 

I think 89 in tbi was the first year of vats, that would disable the injector pulse.

 

do you have power to the injectors. there are two fuses under the dash for them. the ecm only applies ground to them.

 

No I already bypassed that when I first got the car

 

Yeah I got power the there just not pulsing

 

the the ecm is not seeing rpm or a spark while the engine is turning over.

 

how would you go about checking that??

 

First Guess: Not ingenious enough.




Doesn't HAVE to be a wiring/computer problem.

I swapped throttle bodies on my pickup in the process of diagnosing a Code 44. The replacement throttle body only sprayed fuel from one injector. Had power to both.

Turned out that the fuel injector was stuck. Ran the engine a few minutes longer, and it began to spray. Has worked fine ever since.

I'd consider tapping on the injector housings in the (probably futile) hope that they're varnished up.

 

Could very well be the ignition control module again, Don't trust just one part from places like auto zone, try another! I went through 4 one time to get a good one