Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Weird grinding noise while turning left

Thread Tools
 
Search this Thread
 
Old Oct 30, 2002 | 08:20 PM
  #1  
JRoy91RS's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2000
Posts: 560
Likes: 1
From: Austin TX
Car: 91 RS Convertible
Engine: 355
Transmission: 700R4
Axle/Gears: 2.73 peg leg
Weird grinding noise while turning left

Sorry to post a non-thirdgen question here, but my wife's 92 S10 Blazer makes this strange grinding/whirring noise while driving, especially while turning left. The noise fluctuates with RPM's and seems to be coming from the left front axle. The steering feels fine for the most part. I have also noticed a squeak in this area while hitting any bump. I think the squeak is coming from the shock, but I can't be sure. Is this the shock, bushing, tie rod end/sleeve or all of the above? Thanks guys.
Reply
Old Oct 30, 2002 | 09:53 PM
  #2  
rezinn's Avatar
Supreme Member
 
Joined: Dec 2000
Posts: 3,813
Likes: 2
From: California
Has it had the brakes replaced recently? Has the front suspension been examined? Do you mean the noise changes with actual speed, or engine speed?
Reply
Old Oct 30, 2002 | 10:24 PM
  #3  
JRoy91RS's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2000
Posts: 560
Likes: 1
From: Austin TX
Car: 91 RS Convertible
Engine: 355
Transmission: 700R4
Axle/Gears: 2.73 peg leg
Brakes were done about a year ago and are working really well...the sound changes with actual speed, not engine rpms. How can you examine the front suspension? It sounds almost like something is being dragged along the ground, but I looked and couldn't find anything.
Reply
Old Oct 30, 2002 | 10:26 PM
  #4  
SHAGME's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 664
Likes: 0
From: The Garden State?? Bergan County
Car: 1988 IROC-Z
Engine: 355ci TPI WORKED TO THE BALLS!
Transmission: 700R4 T-56 coming
mabey the tire is rubbing on the inner wheel well??? it has happened to me as screws cames out
Reply
Old Oct 30, 2002 | 10:37 PM
  #5  
JRoy91RS's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2000
Posts: 560
Likes: 1
From: Austin TX
Car: 91 RS Convertible
Engine: 355
Transmission: 700R4
Axle/Gears: 2.73 peg leg
You mean like on that plastic flap? I'll check that, but I don't think that's it...
Reply
Old Oct 31, 2002 | 03:02 AM
  #6  
1a12's Avatar
Junior Member
 
Joined: Jun 2002
Posts: 69
Likes: 0
From: oregon
Try pushing on the brakes while driving. If the noise stops or quiets down. Then i would say it is the brakes.. Chevy is famous for there brakes to make noise after a while... which is caused by brake dust cought inbetween the pad and rotor. If that doesn't take care of it. Look at the axle to see if there is anything wrong there. They should be CV axles. sometimes the joint goes bad. But they mostly make a clicking noise while turning.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
Mar 18, 2019 08:29 PM
bdads
DIY PROM
3
Aug 24, 2015 06:01 PM
hokis
Transmissions and Drivetrain
9
Aug 9, 2015 03:57 PM
Fronzizzle
Electronics
2
Aug 9, 2015 01:15 PM




All times are GMT -5. The time now is 05:49 PM.