Heating works only on high/defroster mode!
Heating works only on high/defroster mode!
The heating/air works only in defroster mode. The defroster blows hot air when the engine is heated enough. It'll also blow cold air when the temp selector is on the cold side. Suggestions anyone before the dash is removed. Please!
Thanks,
Brandon
Thanks,
Brandon
check for a broken/disconnected vacuum hose, the default setting without vacuum is defrost. there is an accumulator mounted on the firewall just above the brake booster, that is where most of the hoses come off of.
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
No vacuum coming to the selector switch... maybe somebody "cleaned up" under the hood a little too enthusiastically, or the vacuum selector itself is bad.
Trending Topics
Originally posted by 1986redbird
check for a broken/disconnected vacuum hose, the default setting without vacuum is defrost. there is an accumulator mounted on the firewall just above the brake booster, that is where most of the hoses come off of.
check for a broken/disconnected vacuum hose, the default setting without vacuum is defrost. there is an accumulator mounted on the firewall just above the brake booster, that is where most of the hoses come off of.
Brandon
Thread
Thread Starter
Forum
Replies
Last Post
kyle5647
Tech / General Engine
1
Aug 15, 2015 11:56 PM
db057
TBI
10
Aug 11, 2015 10:11 PM








