I am very desperate, i need a set of L98 heads 64cc. I was sold some cheap smogger ones by Dan opperman. My car is in my mechanics shop and he is chargeing me out the a$$ because it is takeing up space in his lot. Please i need these heads bad. I will pay asking price.

 

check over at nethirdgen.org i thank Justin had a set he was trying to get rid of

 

Do you have a link? thanks for the help

 

There are other options. You could just have 1.94 valves put in your 305 heads. The machining to put them in and unshroud them would probably put them up at 62 cc. Also World Products have stock replacements for around 5 or 6 hundred. I think there are Iron Eagles with close to stock size 170 cc intake runners and 64 cc chambers. Ebay has tons of deals on heads.

 

https://www.thirdgen.org/classifieds...tgo?adid=16381

 

I e-mailed you about them already. Unfortunatley you said that i had to wait until e-bay. As far as the 305 heads, they are actually smogger 350 heads and no ammount of machineing is going to make them flow as smoothe as an L98 head. All i am really looking for is a stock or rebuilt head. It doesnt matter what condition as long as it doesnt smoke. As i said i am really desperate. Anyone have any 64cc heads with 2.02 vaulves?

 

http://www.nethirdgen.org/cgi-bin/ul...c&f=1&t=032883

 

they arent mine, just trying to point you out some

 

I assumed you had a 305 by your sig, so I thought maybe you where replacing that. These may be L98 heads here http://cgi.ebay.com/ebaymotors/ws/eB...category=33617 This shop is also selling some 305 081 castings. http://cgi.ebay.com/ebaymotors/ws/eB...category=33617

 

Sorry about that no, I have an monte ss with a 350 as my daily and i want to put in a hotter cam and all that so when i go to put all the parts on i find out that my heads arnt worth crap. So i need a set of L98 heads to support the cam i want to run. Thanks for the help guys

 

I've got a set, but they are a bit smokey on startup.....off an 88IROC. Stock valves, blah, blah,......:lala:

 

It's too bad you have this uninformed preconceived notion about 305 heads.
If course if you're getting sick of your ever raising storage bill,
and are willing to open your eyes a bit, You may just discover that a set of modded 305 HO/TPI heads are your best option to get
the performance your looking for and at a price you can afford.

And get your car out of hawk.

I have ported and flow tested 4 sets of these heads.
All of them out performed L-98 heads...both cast iron and alumium. All of them. And not by just a little bit.

If your car has centerbolt valve covers look for a set of 081's
If your car has perimeter covers look for 416's.
Port them completly and have 1.94x 1.60 intake valves
installed .

The 081 ports are no different than the 083 L98 head
except that the valves are smaller. And the combustion chamber is smaller.

Once you've sweeped out the chamber walls for the larger valves
they will be 60/61cc's. Just right.

Or just keep your head in the sand.

 

Look dude i dont have time or $$ to get them machined and have race valves put in, If i had the time i am sure it would make a fun project. But my mechanic said 64cc other wise i am going to have to run high octaine and in case you didnt notice gas prices are crazy! I have several offers on L98 heads, All i was going to do was polish the chambers get the valves re seated and then slap them on.

 

thirdgenresource.com is selling heads for $100/pair....

 

Do you have a link? All i found was that they are selling motors not heads? Can you post a link please?

 

they hid them under the "used TPI parts" section......

http://www.thirdgenresource.com/inc/pdetail?v=1&pid=647

 

The only thing is that they dont tell you how many miles are on the heads? And they dont say if they are bare or what? Thanks for the help

 

mileage would depend on the particular car they came from....as far as what comes with the heads, you'd have to call them and ask

 

are the thirdgenresource haeds Aluminum or cast iron

Z28Bama

 

L98 Heads for sale

 

thants dan opperman is real bad news he got me too and a couple others last year, I was going to pay him a visit at home but, lost his address. If you got it please e-mail it to me. and did he sell them on here? if so we should have him banned. I called the police but, they said it was a civil matter and I would have to take him to small claims court. well lucky him I lost his address because I only live 1 1/2 hours from him