replacing everything
Thread Starter
Member
Joined: Jul 2001
Posts: 118
Likes: 0
From: Holland, MI, USA
replacing everything
im basically doing an engine swap, but im doing like everything else, so just hear me out, maybe one of you smart people can help me out. there is a tube that looks like its going to a cannister in the engine bay (front drivers side) that seems to be comming from the brake peddle, what is that? do i need that? also the speedo cable, where does that go? stupid question maybe but i had cruise and i dont want it anymore, and i need to know if i need to get a new cable, or just re rout the one from tranny? thanks guys!
------------------
1983 Camaro Berlinetta
CAME WITH: 2.8L V6, 700R4, no mods, black with red fullsize stripes.
WILL BE: 5.7L V8 with about 400HP, TH350, white with blue stripes.
------------------
1983 Camaro Berlinetta
CAME WITH: 2.8L V6, 700R4, no mods, black with red fullsize stripes.
WILL BE: 5.7L V8 with about 400HP, TH350, white with blue stripes.
Supreme Member
Joined: Mar 2001
Posts: 1,346
Likes: 2
From: Monticello, IN USA
Car: 1991 Z-28
Engine: 350
Transmission: T-5 (gonna buy the farm)
If the tube is coming from the brake pedal area, I would guess it is for the cruise. I'm not sure how the cruise works on an 83, so I can't really comment on the speedo cable issue.
------------------
Joshua Johnston
1991 Z-28
350, T-5, K&N, Ported Vortec heads, Edelbrock RPM, Holley 750 D.P., HEI, 11.07:1 CR, Comp Cams Roller-.510"/.520"-282*/288* dur., Shorty Headers, Dual 2.5 Exhaust,Dynomax Bullet Mufflers, T&R Motorsports custom air intake
------------------
Joshua Johnston
1991 Z-28
350, T-5, K&N, Ported Vortec heads, Edelbrock RPM, Holley 750 D.P., HEI, 11.07:1 CR, Comp Cams Roller-.510"/.520"-282*/288* dur., Shorty Headers, Dual 2.5 Exhaust,Dynomax Bullet Mufflers, T&R Motorsports custom air intake
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Yes, it cuts the cruise when you tap the brake.
If you want to take the cruise govenor out, you'll need a non-cruise speedo cable from the tranny up to the speedo, or a cable from a later car with ECM-controlled cruise that had the cable go directly from tranny to speedo (not sure when that started, but I know '86 had it).
------------------
82 Berlinetta, orig V-6 car, now w/86 LG4/TH700R4. 2.93 limited slip. 2-1/2" cat-back, ZZ3 intake, Accel HEI SuperCoil. AMSOIL syn lubes bumper-to-bumper. Daily driver, work-in-progress (LG4 CC system w/'87 LB9 block, ZZ3 cam, ported World 305 heads, Hooker 2055 headers, 3" Catco cat & 3" catback, restalled TC, Spohn SFCs).
57 Bel Air, my 1st car. '66 396, 9.7 CR forged TRWs, Weiand Action+, Holley 750VS w/4150 conversion, GK 270 cam, Magnum rockers, Jacobs Omnipack, 1-3/4" Hedders & 3" Warlocks, TH400 w/TCI Sat Night Special conv & Trans-Scat shift kit, MegaShifter, 3.08 8.2" 10-bolt w/Powertrax, AMSOIL syn lubes bumper-to-bumper. Idles smooth @ 600 RPM in D. Best 15.02/95.06 @ 5800' Bandimere (corrected 13.93/102.4 @ sea level).
If you want to take the cruise govenor out, you'll need a non-cruise speedo cable from the tranny up to the speedo, or a cable from a later car with ECM-controlled cruise that had the cable go directly from tranny to speedo (not sure when that started, but I know '86 had it).
------------------
82 Berlinetta, orig V-6 car, now w/86 LG4/TH700R4. 2.93 limited slip. 2-1/2" cat-back, ZZ3 intake, Accel HEI SuperCoil. AMSOIL syn lubes bumper-to-bumper. Daily driver, work-in-progress (LG4 CC system w/'87 LB9 block, ZZ3 cam, ported World 305 heads, Hooker 2055 headers, 3" Catco cat & 3" catback, restalled TC, Spohn SFCs).
57 Bel Air, my 1st car. '66 396, 9.7 CR forged TRWs, Weiand Action+, Holley 750VS w/4150 conversion, GK 270 cam, Magnum rockers, Jacobs Omnipack, 1-3/4" Hedders & 3" Warlocks, TH400 w/TCI Sat Night Special conv & Trans-Scat shift kit, MegaShifter, 3.08 8.2" 10-bolt w/Powertrax, AMSOIL syn lubes bumper-to-bumper. Idles smooth @ 600 RPM in D. Best 15.02/95.06 @ 5800' Bandimere (corrected 13.93/102.4 @ sea level).
Thread
Thread Starter
Forum
Replies
Last Post
