Bobby_80s
Supreme Member
close
Mar 8, 2025
- Join DateNov 2006
- LocationConnecticut
- Posts:1,698
- iTrader Positive Feedback100
- iTrader Feedback Score(2)
- Car1987 Camaro, 1986 Trans AM
- EngineV6 2.8 multi-port and V8 5.0 FI
- Transmission5-Speed and Automatic
- Axle/Gearsno idea
- Likes:0
- Liked:0 Times in 0 Posts
Ok dumb question but i just wont to make sure
besides the 3 screws that bolts the delay circuit/cover on the wiper motor
is there anything else i need to know
im replacing a broken one and i notice theres a half blue/green circle that spins on the board
does it need to be in a certain position before bolting it on?
or is there anything else besides the 3 bolts taht i need to do to correctly install this?
besides the 3 screws that bolts the delay circuit/cover on the wiper motor
is there anything else i need to know
im replacing a broken one and i notice theres a half blue/green circle that spins on the board
does it need to be in a certain position before bolting it on?
or is there anything else besides the 3 bolts taht i need to do to correctly install this?