but can someone help me out, rebuilding most of my dist and got a new ign control module, and now i don't know what wires go where. what two wires hook to the other end of the module? if anyone has a picture thatd be great

 

I believe the connector that comes from the pickup coil attaches to the ignition control module.

 

the seven pin side is fine, the other side is the one that im having trouble with. there is a spade connector on what looks like a condenser (im guessing the radio noise canceller) that im not sure where it goes. if it does go on one of the the two terminals on that side of the module then what goes on the other one?

 

some pics to help. the first is of my capless distributor.

in here you can see the litte condenser thingy that has the blue wire with a terminal on the end. no idea where this goes

you can also see the black wire form the three pin "set the timing" plug that goes into the distributor cap. i attatched it to the screw that holds the little condenser thing to the distributo because it had a ring terminal and some black wire (broken) on it when i got the cap off, i assumed (i know i know) that this is where it goes. i also put blade terminals on the red wire coming off the three pin plug the brown wire also on that plug already had one, i also don't know where these go
if i need that plastic cover that used to go over all of these wires
if re attaching the black wire there was right
where the hell does that little blue wire go?

 

second picture of the three wire connector that goes on the cap

 

Best picture I have

 

it appears i am missing some parts. but thank you!!!!!!!! atleast with that picture i can probably make it work the way its supposed to just knowing where everything is supposed to go

 

actually i feel really dumb now, pretty sure i just saw this last night
http://www.rockauto.com/catalog/more...284&cc=1035492