STARTER REMOVAL -HELP
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 59
Likes: 0
From: LaCrosse Wis.
Car: 1990 Iroc Z Red Vert
Engine: 305 TPI
Transmission: Auto
Axle/Gears: Stock
STARTER REMOVAL -HELP
I am replacing the starter in my 87 Iroc 350. Can't get it out from the car. Do I have to remove the bolts from the exhaust y-pipe and lower it to get the starter out from the bottom of the car? (hope not) I am all ears! THANKS JIM
Joined: Sep 2005
Posts: 27,899
Likes: 2,437
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: STARTER REMOVAL -HELP
Not necessary...
Point it nose down, rotate it so the solenoid is toward the front of the car.
Might help to take out the #6 & #8 spark plugs.
Point it nose down, rotate it so the solenoid is toward the front of the car.
Might help to take out the #6 & #8 spark plugs.
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 59
Likes: 0
From: LaCrosse Wis.
Car: 1990 Iroc Z Red Vert
Engine: 305 TPI
Transmission: Auto
Axle/Gears: Stock
Re: STARTER REMOVAL -HELP
Got the starter out today. New one in and car running again. It was a SOB. Thanks for the tip from member sofakingdon. Jim
Thread
Thread Starter
Forum
Replies
Last Post