Hi
today I got a new ecu still not starting
I have spark just now I sprayed half can of starting fluid in it and still not even a half start nothing
I have fuel pressure it's 50 psi ish
and I hear the pump run
I also changed the icm 2 days ago did nothing
I'm lost and I need help
I don't have a scanner
I'm gonna take 2 plugs out and see if it's fluded
pls help me

 

Did you swap over the memcal ?

 

I did swap it out of course
but now I get the gas smell from cranking it
and I took out 2 plug wires on diff banks and they both had spark with a screwdriver method
then for ***** I put my old plug in it and grounded it and zero spark on my plugs they are 2 years old and 2000kms
I used a old head spark plug grounded it on the same spot and it worked perfty
so I ordered some new plug here tomm and try them first
and I think my accel tpi coil that I bought years ago may be weak
I ordered a brand new one on eBay
today
I'm gonna change the plugs tomm and see after that
I'll let you know
it's crazy

 

It was the spark plugs all along 2 years old

new a.c. delco plugs and it's runing like new again
it was 2 things
bad computer making the fuel inj not pulse and my stupid spark plugs
hopefully this helps someone