hey guys i've got a question.. my buddy at work has a camaro and i have a trans am.. i think this is a dumb question but i'll ask anyways

90 rs 305 tbi
cam (about same specs as the lt1 cam)
edelbrock ted headers, flowmaster muffler
edelbrock intake
5 speed
3.08 gears

89 ta 350 tbi
lt1 cam
ported 305 tpi heads
edelbrock performer tbi intake
flowtech headers, ravin muffler
bored .40 over
3.42 posi
700r4

who's gonna win?

 

You'll win.

 

unless your car is running like ****, it should be no problem for you. Have fun!

 

The winner is the one who has their setup tuned the best. I know plenty of properly tuned LT1 cammed LO3's that will work over a similarly equiped 350TBI with a bad tune or no tune at all. By tune I mean burns their own chips correctly.

 

i would have to say that your going to smoke him. you would have to be in pretty bad tune to loose

 

Go eat him alive and tell us the story afterward

 

i think you would have to mess up pretty bad not to take this one

 

I woud not be to cocky. Some built 350 TBI's run 15's when they could be low 13's. Tuning a TBI system is the key. You can shave seconds off of built TBI system when going to a custom tune. I have seen heads and cammed TBI cars/trucks run slower than stock because of a poor tune.

 

brian at tbichips.com made a chip for me.. stage 2 chip

 

Did you send him datalog info or just tell him what you had. Any off the shelf stage # chip is a stab in the dark and can only be a rough geuss. I strongly recomend staying away any stage 1 or stage 2 chip.

 

i told him what i have, i'm rebuilding the motor myself so i know every single thing going in this motor, i've talked to him for a few months now about stuff and he seems to know his stuff. he has built a chip like the one i need for himself so i'm sure it's going to be fine. he's been telling me everything to get for my car.