1984 Camaro Z28

350 5.7L

Edelbrock Mild performer camshaft/lifters
Edelbrock 600cfm 4barrel performer carb
Nitrous Express Hitman Nitrous Kit 150shot
Hedman LT headers
2.5" true dual exhaust
Weiand Xcelerator Intake Manifold
proform Electric Water pump
MSD distributor, accel HEI super coil, MSD street fire SP wires, platnium plugs
1987 700r4 4 speed auto
3.73 gears
275/60/15 meats on rear
A/C delete, back seat delete, exhaust muffler/cat delete

all this plus a heavy foot

About what would say id run? 0-60, 1/8 mile, 1/4 mile

Also any HP/TQ guesses? both on nitrous and motor only

Thanks ahead of time!

 

Run it and find out... Could do anything from 14's to 12's.

 

no track around here

 

I guess you're SOL then to know what it'll really run. You can guess all day long but you never know till you run it. I guessed on how mine would do after swapping in the current 350 and was way off, ran much slower than I thought it would first time out.

 

You don't mention what year the 350 is so we have no idea what heads are on it...what are the cam specs?

 

Humm... Are you still at Fort Eustis? If so, just 58 miles away is dun dun duuuunnnnnnn, Richmond Dragway. That's a closer drive than what I do to go to the track.

 

Yeup. I have a 70 mile drive to the track. A lot of guys drive further than that too. Being only a hour away is a pretty slick deal.

 

cars in wyoming ya'll, closest track is 200 miles away lol, otherwise i wouldn't have asked what ya'll thought. telling me to go to the track really isn't ganna get me anywhere, if you have thoughts on what the times/HP might be, please, do share, thats all i was asking lol, and ya, im in virgina, maro's not.

 

Ok, 13.9's on street tires on the street. You could always buy a GTech mine's pretty accurate.

 

I have seen more than one stock L98 TPI hit 12`s on a 125 shot in 1320'.depending on gear,driver,tires,holding together,miles,proper set up and retard,stall and a few other things you should see 12`s.Get your trap speed amd mph and you can calculate the rest

 

run on cast pistons, stock rods, it might not run very long. But you could try a g-force unit. I think they are somewhere now between 100 and 200 dollars. They are pretty accurate. I used one while running down track and it was only like .05 off my 1/4mi time. Might try that. Otherwise there is no way to tell, could be 12's, could be 14's, everything else is just speculation.

 

damn im only 25 minutes away xD and then another is 40 lol i feel special

 

Still no info on the heads or what year the motor is?

I say 13.50's with the info provided.

 

take a look at autometers dpic. kinda like the gtechs. ebay has used ones on fairly often.