Dyno Day 2003 sign up
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
CANCELLED
Hey all, it has been awhile but, after numerous conflicts with dates, I have set a date for the Dyno Day 2003. The date will be Sat. June 14th/03. We are shooting for an all day event which will start at 8 a.m. until 4 p.m. We are also trying to organize a BBQ for afterwards and a BBQ lunch of hotdogs and pop. I realize that this day is the day of the Camaro Nationals, but I have to make a choice of dates and the 14th is the only date with a minimal conflict. If anyone is interested it will be approximately $45 each (not including the BBQ) The cost will vary depending on how many confirm. We are hoping on getting 16-18 cars out. You can confirm by replying to this post. I will keep a tally on those that sign up and I will post the names.
1. Slade
2. Kevs87TA
3. 88Redxsty
4. Awesomeame
5. D's89Irocz
6. Firehawk
7. onefastta
8. Palric
9. Tanager11
10. Eric
1. Slade
2. Kevs87TA
3. 88Redxsty
4. Awesomeame
5. D's89Irocz
6. Firehawk
7. onefastta
8. Palric
9. Tanager11
10. Eric
Last edited by Kevs87TA; 05-22-2003 at 08:28 AM.
#5
Supreme Member
Join Date: May 2002
Location: Brampton, Ontario
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
I still think we should have it on the 24th...
And Kev.. its what happened after that pic that gives me nightmares mwa ha ha ha ha... ha... ha... ewwwwww
And Kev.. its what happened after that pic that gives me nightmares mwa ha ha ha ha... ha... ha... ewwwwww
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
Originally posted by trigger GTA
me!
me!
???? So does that mean you're in, Scott. I thought you said that the date was no good to you. Just trying to clarify it.
Stangeater- it's in Kitchener at Forrest & Forrest Racing on Shoemaker ST. Slade1, 88redxsty and Tanager have been here before.
#9
Supreme Member
i said the 7th was no good.
the camaro nationals are on that weekend but i dont have a camaro so i can just go the sunday to the show
so i will be there for dyno day on the 14th
the camaro nationals are on that weekend but i dont have a camaro so i can just go the sunday to the show
so i will be there for dyno day on the 14th
#12
I will be there but not dynoing... Haven't done anything to the car to make horsepower difference... I like to watch people expressions on Dyno day.. I call it PUT UP OR SHUT UP DAY...
See you guys there..
See you guys there..
#14
Supreme Member
Join Date: May 2002
Location: pefferlaw ontario
Posts: 1,951
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 iroc-z custom
Engine: 355 tuned port
Transmission: 5spd baby, only way to go
Axle/Gears: 3.45
id like to come but ill be at the nationals winning first in the modded class!!
if you have anymore this summer ill be in..
iroc2nv
if you have anymore this summer ill be in..
iroc2nv
#17
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
No problem Azure, there is going to be a couple again this year. You will have to let me know
#18
Supreme Member
Join Date: Jan 2003
Location: Ontario, Canada
Posts: 1,931
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
Kevin ...I am not so sure I can make it now ..........with this new motor issue..... I will be pissing oil out on the dyno ....... I am game to try but ....... who knows if they would like that .
I don't think they would
I don't think they would
#20
Supreme Member
Join Date: Oct 2001
Location: "No one cares if you're in before the lock!" - Best quote ever.
Posts: 1,319
Likes: 0
Received 0 Likes
on
0 Posts
I'll know within the end iof the week if I'll be, for sure, getting the 4th, and then I intend to dyno ASAP to find out what I'm starting out with. I'll keep you updated.
#21
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
Ooooh, there's a real comedian in our midst...
Azure...no problem, I hope it all works out for you.
Dan...just get it fixed... I was thinking about it today, did you have a recent oil change? Coming out the dipstick almost sounds like too much oil in the pan, but I don't really know for sure, just guessing. Well you do have a few weeks, so let me know. I won't take you off the list.
Azure...no problem, I hope it all works out for you.
Dan...just get it fixed... I was thinking about it today, did you have a recent oil change? Coming out the dipstick almost sounds like too much oil in the pan, but I don't really know for sure, just guessing. Well you do have a few weeks, so let me know. I won't take you off the list.
#23
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
I don't see why not. I have been told that they get ricers into dyno their cars. . Are you thinking about coming to Kitchener to dyno your new toy?
#25
Supreme Member
Join Date: Dec 2001
Location: Brampton
Posts: 1,214
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 Vert
Engine: 305
Transmission: TKO
Axle/Gears: 3.55 10-bolt
Kev....I am not sure if I am going to have my car all back together for it the 14th. I would say keep my name/spot on there and worse case scenerio I just throw my Nissan on there (provided nobody minds having the FWD jap crap out there)
#26
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
CANCELLED !!!! Until further notice...
There are alot of people that want to come out, but can't due to other committments. There are also alot of people that don't have their cars ready or possibly won't have them ready for the 14th. I was hoping on having a large event this year, but already I am down to 7 definites and a few possibles. I will reorganize another session later this summer. I apologize for any inconience this may cause to all that had confirmed with me. I am just trying to make the day a good one for all.
There are alot of people that want to come out, but can't due to other committments. There are also alot of people that don't have their cars ready or possibly won't have them ready for the 14th. I was hoping on having a large event this year, but already I am down to 7 definites and a few possibles. I will reorganize another session later this summer. I apologize for any inconience this may cause to all that had confirmed with me. I am just trying to make the day a good one for all.
#27
Supreme Member
Join Date: Jan 2003
Location: Ontario, Canada
Posts: 1,931
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
Kevin ...I appologise .... no ...I do have some seriuos blow by going on here .......... and believe it or not ........... its doing it ...with a low volume of oil ............ I can't even race anymore this season .....or mod my engine ...... no point in even putting in my gears ( just a speedier death for the LB9 )
...again I appologise man
...again I appologise man
#28
Supreme Member
Join Date: Dec 2001
Location: Brampton
Posts: 1,214
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 Vert
Engine: 305
Transmission: TKO
Axle/Gears: 3.55 10-bolt
Ya kev....I am sorry too man....I would have showed up with something to dyno....regardless thanks for organizing this again...I know you probably put a good bit of work into it....we appreciate it!
D
D
#29
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
No problem guys, like I said, I am trying to get it to be a bigger event for everyone, whether they are participants or spectators, to enjoy. I am thinking of July or August for Dyno Day. We'll see how everyones schedule is then.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Exterior Parts for Sale
1
09-22-2015 08:28 PM
manifoldsrme
Engine/Drivetrain/Suspension Parts for Sale
0
09-17-2015 11:40 PM