Aftermarket Runners,where?
Thread Starter
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Aftermarket Runners,where?
Where's the cheapest place to get some aftermarket runners?
I've got my plenum and TB off and might as well get some better runners...while Im at it.
heres what Im doing, I took the alt. bracket AC bracket, and thermo neck to get powder coated almost chrome, I took the plenum to the guy that did my wheels and let him polish it to a mirror finish and Im strongly thinking about jerking out the air tube crappy manifolds and getting non air headers.
What else should I or can I do on a budget?
where at? whats good?
I've got my plenum and TB off and might as well get some better runners...while Im at it.
heres what Im doing, I took the alt. bracket AC bracket, and thermo neck to get powder coated almost chrome, I took the plenum to the guy that did my wheels and let him polish it to a mirror finish and Im strongly thinking about jerking out the air tube crappy manifolds and getting non air headers.
What else should I or can I do on a budget?
where at? whats good?
Last edited by Wishmaster's87IROC; May 8, 2003 at 05:25 PM.
Thread Starter
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Originally posted by reilly8282
did you try a search bigdawg?
did you try a search bigdawg?
Maybe the admin should just turn this into a SEARCH forum. Cause somebody always chimes in with the "do a search" phrase.
Thread Starter
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
heres a pic.
Oh yeah, gonna replace the yellow wires and dist. and coil with MSD red's.........
I cant drive the car for a while due to legal reasons, "gotta lay low" with it...so I might as well do some stuff to it...
Oh yeah, gonna replace the yellow wires and dist. and coil with MSD red's.........
I cant drive the car for a while due to legal reasons, "gotta lay low" with it...so I might as well do some stuff to it...
Last edited by Wishmaster's87IROC; May 8, 2003 at 05:27 PM.
Member
Joined: Oct 2002
Posts: 281
Likes: 0
From: ASHEVILLE NC
Car: 1988 IROC
Engine: l98 350 tpi
Transmission: 700r4
ohh sorry man, i didnt mean to be like everyone else, i was actually being serious,.....sorry.....there is a HUGE deal of comparisons, and tests with about 4 or 5 sets of different runners......i hardly even post anymore....all my questions are answered in a search.... but i am sorry if i offended ya.....
Supreme Member
Joined: Nov 2001
Posts: 1,886
Likes: 0
From: Jacksonville, NC
Car: Guess
Engine: Crazy 8
Transmission: So close to being a manual I can taste it
Re: Aftermarket Runners,where?
Originally posted by Wishmaster's87IROC
Where's the cheapest place to get some aftermarket runners?
I've got my plenum and TB off and might as well get some better runners...while Im at it.
heres what Im doing, I took the alt. bracket AC bracket, and thermo neck to get powder coated almost chrome, I took the plenum to the guy that did my wheels and let him polish it to a mirror finish and Im strongly thinking about jerking out the air tube crappy manifolds and getting non air headers.
What else should I or can I do on a budget?
where at? whats good?
Where's the cheapest place to get some aftermarket runners?
I've got my plenum and TB off and might as well get some better runners...while Im at it.
heres what Im doing, I took the alt. bracket AC bracket, and thermo neck to get powder coated almost chrome, I took the plenum to the guy that did my wheels and let him polish it to a mirror finish and Im strongly thinking about jerking out the air tube crappy manifolds and getting non air headers.
What else should I or can I do on a budget?
where at? whats good?
Trending Topics
Supreme Member
Joined: Nov 2001
Posts: 4,456
Likes: 3
From: Ocean, NJ
Car: Check The Sig
oh man, this isnt good... TAKE IT TO PM"S!!! i belive all the runners are created equaly. It really comes down to whos got more potental to port the shight out it. AS&M are the ones with teh most meat i belive
Supreme Member
Joined: Oct 2000
Posts: 1,780
Likes: 0
From: Warner Robins, Ga
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
I hate to say it... but a search is the best bet on the SLP runners, or any comparison of runners. I believe that is one of the most posted topics, only behind will fourth gen seats fit in my thirdgen.
There is alot of things said about them, some good, some bad.
They are better than stock... so welcome to go from there.
There is alot of things said about them, some good, some bad.
They are better than stock... so welcome to go from there.
Thread
Thread Starter
Forum
Replies
Last Post