ok i am having a Hell of a time putting my engine together. I dont know which vacum lines to put in the 4 holes they put on the mini ram. that is problem #1

the second on is, the throttle cables the braket that comes on the mini ram is on an angle and rubs the pieace on the tb. when it rubs it will eventually brake the cable, what did you guys have to modify or adapt to the mini ram in your installs? thanks for the help
Bobby

------------------
89 red iroc-z
386 strocker
ross pistons 10.5.1
eagle h-beam rods
miniram
slp cam 224 230 535 544
1.6rr
edelbrock performers p+p
ford 9', 4.11, 31 spline
baer rear brakes
line lock
all the bolt ons
200 shot on the way

 

ttt

 

There should be a black bracket and a silver bracket provided for the cables. The silver one needs to be used for the accelerator cable because of the angle problem. It mounts on top of the fuel rail so the cable is angled down towards the throttle body. The black bracket on the side holds the TV cable and cruise control cable. For the vacuum lines . . . you can get fittings at Pep Boys. If one isn't used than plug it closed. I used all four though . . . PCV valve, brake boaster, fuel pressure regulator and there was another line on the passanger side that needed hooked up.

------------------
'89 Formula 383 TPI

 

thank for the input, i found the silver bracket in the garage last night, i finnally figured it out. thanks for the help. I found what all the holes are for to.
Bobby

------------------
89 red iroc-z
386 strocker
ross pistons 10.5.1
eagle h-beam rods
miniram
slp cam 224 230 535 544
1.6rr
edelbrock performers p+p
ford 9', 4.11, 31 spline
baer rear brakes
line lock
all the bolt ons
200 shot on the way