700r4 problem
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 42
Likes: 0
From: holland,pa
Car: 82 Z
Engine: 350 carb'd
Transmission: th-350
Axle/Gears: 3.08 posi
700r4 problem
ive isolated the problem in my 700r4 as being stuck in second gear. any ideas on wat could cause this? also i changed the filter and fluid today, and i found 2 small plastic pieces. any help is greatly appreciated. thanks
Joined: Aug 2005
Posts: 1,366
Likes: 1
From: louisville, ky
Axle/Gears: '01 3.42 10 bolt
it's a good possibility that the plastic pieces are the washer that holds the reverse input drum off the pump stator. this would allow the reverse input to come out of place and put your 2/4 band in a bind causing you to start in 2nd. contrary to popular belief, shifting into 1st or second with the shifter doesn't mean the band applies. it is only applied in 2nd and 4th wether the tranny is shifting itself or you are manually shifting it.. sounds like your band is in a bind on the reverse drum.
Thread
Thread Starter
Forum
Replies
Last Post
someone972
Transmissions and Drivetrain
6
Aug 30, 2015 12:52 AM






