Help My Iroc won't shift into park
Help My Iroc won't shift into park
No problems shifting shifter goes all the way forward into what the indicator says is park but it's still in gear can't get it up in to reverse either. Any ideas?
Thanks Sean
Thanks Sean
Supreme Member
iTrader: (3)
Joined: Jan 2004
Posts: 2,311
Likes: 0
From: p'cola FL
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
did you work on the car recently?
maybe the cable is bound, or damaged.
ive even seen a penny fall into the console and cause problems.
your questions is kinda vague. sorry.
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
mine did the same thing when i first bought it and it was a loose bolt in the shifter lincage mounted to the trans pan check it out
Sorry for being vague. I knew I should have put more information in there but I was not sure what was needed I took apart the center console and could not find anything wrong so I came inside looked for some help here.
I have not ever worked on the tranny I've owned the car for a 6 months it is completely stock.
I crawled under it and the linkage that bolts to the pan is just hanging there both bolts are gone.
I found some bolts put it back in place and it works fine thanks for the Help.
I have not ever worked on the tranny I've owned the car for a 6 months it is completely stock.
I crawled under it and the linkage that bolts to the pan is just hanging there both bolts are gone.
I found some bolts put it back in place and it works fine thanks for the Help.
Supreme Member
iTrader: (3)
Joined: Jan 2004
Posts: 2,311
Likes: 0
From: p'cola FL
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Sorry for being vague. I knew I should have put more information in there but I was not sure what was needed I took apart the center console and could not find anything wrong so I came inside looked for some help here.
I have not ever worked on the tranny I've owned the car for a 6 months it is completely stock.
I crawled under it and the linkage that bolts to the pan is just hanging there both bolts are gone.
I found some bolts put it back in place and it works fine thanks for the Help.
I have not ever worked on the tranny I've owned the car for a 6 months it is completely stock.
I crawled under it and the linkage that bolts to the pan is just hanging there both bolts are gone.
I found some bolts put it back in place and it works fine thanks for the Help.

Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM





