what will a th350 take?
Thread Starter
Member
Joined: May 2004
Posts: 319
Likes: 0
From: MD
Car: too many
Engine: SBC
Transmission: AUTOs and a 5 speed :D
Axle/Gears: you name it
what will a th350 take?
what should I expect for a th350 to hold (hp and torque)?
will it hold 410 ft lbs at 5000 RPM, 440 HP at 6200 RPM from a LS2?
the reason I ask is I have 3 th350s and keep looking at the ls2 from jegs for my next engine for my camaro
will I need a different trany?
?
will it hold 410 ft lbs at 5000 RPM, 440 HP at 6200 RPM from a LS2?
the reason I ask is I have 3 th350s and keep looking at the ls2 from jegs for my next engine for my camaro
will I need a different trany?
? 
Supreme Member
Joined: Aug 2005
Posts: 3,004
Likes: 4
From: Yellowknife, NWT, Canada
Car: 84 Z28
Engine: 357
Transmission: TH-350C
Axle/Gears: 3.43
its probably getting borderline for a th350 depending on what if any modifications have been done to it.
dreamingdyno2000 figures my 357 should be putting out 380hp/450ftlb and my th350c hasnt had a problem handling it yet...
dreamingdyno2000 figures my 357 should be putting out 380hp/450ftlb and my th350c hasnt had a problem handling it yet...
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
they hold as much as you build them for. I know buddies running 750hp into them and they last a few seasons at the strip. Mine has held up 2 seasons as well so far.
Trending Topics
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
basic rebuild and a little cash thrown at them makes them survive at my level, and a ton of cash makes them survive at my buddies level, still cheaper than a built 700R4 though.
Thread
Thread Starter
Forum
Replies
Last Post
