does trans fluid enter the rad from bottom line or the top! I was informed by a couple of ppl that it enters from the top yet other ppl said it enters from the bottom just like your cooling system who's right?
BD3


------------------
86 IROC mods:retro-fitted to a Comp Cams 210-215 499/499 112 roller cam,T.E.S.,Hooker Aerochamber catback
T.P.I.S. airfoil,Dan Burk ported intake system,,March
pulleys,Accel 8.8wires,ign.mod,Crane PS-91 coil,Crane HI-6S ign.box
RAM AIR induction,gutted MAF,
B&M shift kit,3.73 rear gears,Accel afpr,Hypertech stage 2 chip,Random Tech.cat.,Lakewood lower control arms,Lakewood adj.panhard rod,mac subframe connectors,PST polygraphite bushings
"The more I learn about women,the more
time & money I spend on my IROC"

 

Makes more sense to me that it enters from the top and flows downward. Now that you mention it, I'm not sure though. I can't remember which way I gone and done it...

 

undo your top line, put a drain pan underneath andfire the car up for a sec. If the fluidcomes out of the rad, the lower line is the inlet. If it comes out the top line, well that kinda answers itself

------------------
85 Berlinetta Iroc exterior NOW 454 powered, 4.10 gears, 275/60/15 Hoosier Quicktimes and a PILE of other goodies..........YES, it's street driven!

check it out at http://www.bsronline.net/members/rob/rob_specs.html

 

Actually did it the other way...Undid the bottom line and had cooler hooked up but left bottom cooler line off to pump 3qts out only to pump it out of the bottom line onto the strt. Called Pro Built and they confirmed 700r4's inlet bottom return top.
BD3