T5 hydraulics install
#1
Senior Member
Thread Starter
Join Date: May 2011
Location: New Bedford MA
Posts: 855
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Gta trans am project 1-1/2
Engine: 86 4 bolt main cammed sbc 355 hsr
Transmission: 89 wc bw t5
Axle/Gears: Bw 9 bolt (3.27) pbr 11in
T5 hydraulics install
Ok so i need help im putting a wc t5 from a 89 formula into a 88 an noticed there isnt a hole for the master cylinder where is the exact location i have to drill a hole for the master pics would be greatly appreciated
#2
Supreme Member
iTrader: (4)
Re: T5 hydraulics install
Use that 89 formula or another factory stick 3rd / 4th gen for reference.
Install the pedals so you have the pedal-bracket to firewall bracket in place.
Mark the two holes for that which is what the u-bracket bolts through.
Remove the gasket from the master cylinder if it has one and use that against the two bracket holes to mark for the cylinder hole.
Install the pedals so you have the pedal-bracket to firewall bracket in place.
Mark the two holes for that which is what the u-bracket bolts through.
Remove the gasket from the master cylinder if it has one and use that against the two bracket holes to mark for the cylinder hole.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
rsrmoore
Transmissions and Drivetrain
1
08-07-2015 08:44 PM