700r4 problem
Thread Starter
Junior Member
Joined: Aug 2019
Posts: 2
Likes: 0
700r4 problem
I have a 700r4 behind my stock 350 it was running fine with my old motor I put in a rebuilt one same block number same flex plate only thing that changed is the intake and carb went from a Quadra jet to a demon street carb trans will not shift into any gear besides 1 neutral and revers
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: 700r4 problem
Is the TV cable connected and properly adjusted? Is a TV geometry kit required for the new carb?
If the TV set up is all good then pull the governor, good possibility that the gear is stripped.
RBob.
If the TV set up is all good then pull the governor, good possibility that the gear is stripped.
RBob.
Thread Starter
Junior Member
Joined: Aug 2019
Posts: 2
Likes: 0
Re: 700r4 problem
I have one more spot for the adjustment to try and I looked for a geometry kit and havent found one for the overner can’t it go out so fast every when the trans was working with the old motor
Thread
Thread Starter
Forum
Replies
Last Post
86_Z_383
Transmissions and Drivetrain
3
Mar 9, 2011 05:11 PM
eightTfourTA
Transmissions and Drivetrain
1
Mar 31, 2001 07:29 AM
SlowCamaro88SC
Transmissions and Drivetrain
11
Jan 9, 2001 03:54 AM