v6 headers non emmissions

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1872979702




auction 2

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1872995185

 

Those are pretty long. Good luck shoe horning those in.

 

Those if not mistaken Are the infamous S-10 headers. I know cause I had the Camaro type. Drivers side would not fit at all.

 

Those Hooker headers, the eBay site said that they sell them somewhere and that they fit the 78 - 87 V6 Camaro. I've got a V6, am I to guess that they really wouldn't my car? I figure if they did, I imagine all V6ers would have em.

 

I am tending to aggree with CHC, that bottom set does appear to belong to the S-10 family. But I could be wrong, I emailed him, so I will post.

 

2.8l weren't in Camaros until 82. Those are truck headers if I ever saw a pair. F-bodies are pretty stingy when it comes to side to side clearance in Engine bays.

 

the second set actually come off a camaro but the top i'm not sure of. interesting topic though

 

those hooker headers are for the 90* V6's that came in some 70's camaros, monte carlos. I checked with the part number and Hooker's website

 

I suspected that too

 

Maybe my eyes are decieving me, but don't that second set look like 2 drivers sides?

 

Your eyes are deceiving you.

 

I would have to agree with you.

 

Look again, just mentally swith one of the headers and you will see they are not the same.

 

I still can't see it. One of us must be retarded. Probably me.

 

I think both of us are retarded because I must be looking at the wrong picture or something because I see a match.

 

I'm looking at the one that says 11/14/2002 in the corner.

 

I'm looking at the one with the date on it. Yeah, they different looking, but look at where they are going to bolt up into your heads. One will go back toward the rear of your car and the other will go to the front.

See the Hooker ones laying down. One set of ports is facing up and one is facing down. The collectors are facing the same way. That is how it should look. . . In the other picture both ports are facing down and the collectors are going the same way. That can't be right.