if u got any qoute me a price to 12823 plz

 

I got 2 sets of iron heads. Ill weigh them and get you a quote when I get a chance...might be a day or 2.

 

I have a 2.8 Upper intake manifold and tb if you are interested. PM me if so.

 

You can have the entire 2.8 engine from my Camaro for very cheap if you'd like....

 

thank you i just need one set for now so just quote me for one set

deff interested

rob how much and can u get me a shipping qoute to 12823 plz

 

Your not too far from Syracuse, right? It would be easier to just load it up in a U-Haul van, and drive it over along with the rest of the stuff. If I do ship it though, it would have to be piece by piece, otherwise they'll want to freight the engine over....

 

about 3 hours away but i could meet ya down that way if u wanted to drive it up, would actually be much closer if u just went up the parkway.

if u take the parkway to the end it runs right into 287/rt 87 in ny. should take about an hour for u to get there

saracuse is just to far west

 

Do you have the means to get it back by where you are if you meet me half way? If you do, then that might be the best way to do it. I have to shoot over to Long Island anyways soon, I could easily make the detour, drop it off, then get back on the highway. Just need to load up the van w/some White Castles for the trip lol....

 

dude u deff gota bring some white castle, they dont have any in ny state, and the ones from the grocery store just dont taste the same,

yeah i could throw the motor in the back of the tracker or i got a truck and trailer i can throw it on

 

.... oh dude, now I gotta tease ya a little;

 

dude thats so wrong lmao

pm me ur cell number again my cell phone is broke so i lost all my dam numbers


when u think u could bring it up and how much u want?

 

Similar thing happened to me too, bought a new phone but the damn SIM card was stuck in the old one, had to tear the freaking phone apart just to get it out. Lost everything....

How much you got....?

Seriously, you know how I am with stuff, just lemme know what you think its all worth....

 

pm sent

 

.... right back at ya. Consider the whole damn thing if you want bro.

 

lol the whole car??

 

.... too many toys, and I only need one headache to work on this Winter. Why not pick up where I left off w/her, she has much potential.

 

cause do i really need 2 turbo cars???, but actually i know somone who may want it and is looking for a project so pm me back a price and pictures for it

 

.... one is such a lonely number though, isn't it lmao? You could always have one single, and another twin. Orrrrr, one turbo, and the other w/fabricated M90.

If its for someone else though, lemme think about it first. I would obviously sell it to you because we're friends, but if you honestly don't need another car I could always shove this thing in it after I send you the 2.8 setup cuz its just sitting in the garage....

 

pm sent again

 

what???? There's a WC 5mins from me. I'm on the Island tho so probably different

I don't know where in NY you live but there's a guy on craigslist thats giving away a 2.8 + Engine stand for free

http://longisland.craigslist.org/pts/1430474659.html

 

Haha, I could use another engine stand too, just not the engine though. Hmm....

 

Yea I was going to scoop that up but I don't have a truck to put it in and my pops was making it seem like a big deal to ask his friend to borrow his truck so

 

What exit on the L.I.E. are you guys? Dave, you'll have yourself two engines if you split the cost in gas. I'm headed out there anyways soon, could pick it up no problem....

 

53.

Only things I wanted were the valve covers, upper/lower plelums

 

Oh the joys of driving to Suffolk County lol! Are the police still a pita out there? You can definitely have whatever you need if Dave doesn't need them, could have it all off in minutes. Just lemme know where to meet up with ya, or just meet me by the guys house...

 

What the hell am I saying, you can have whatever you need from that engine for Christ's sake, as your the one who found it in the first place lol....!

 

I'll shoot the guy an email asking where he's located. Took him a few days to respond to my first email when I asked him if he really was giving it away for free lol.

Haven't had any problems with the police for awhile. While driving home today this Sheriff was following me on the LIE. I know he was running my plates. It's like dude, either pull me over or just pass by because I hate doing 60-70mph lol. I know what he was doing though, run the plates and if he found anything wait until I was in the Islip district then pull me over and give a ticket. Tickets in the Islip district = Money for that town. Nassau cops are a PITA.

 

rob done deal call the guy up about it, longblock is perfect for me

 

We used to go clubbing out by Hempstead turnpike, just before Suffolk county, and people had terrible things to say about the police there. Had a few run ins with them every now and then when we crossed over into Babylon, but nothing major though. Back then, people used to spit on the Nassau police, as they couldn't hold a candle to the Suffolk blue boys (they were the highest paid police in the country, not sure about today though)....

 

Gotta see when is a good time. E-Town has the re-scheduled shakedown for this weekend, and MIR has the world cup finals. Busy weekend for sure. Could prolly swing it for this coming Wednesday, to be honest....

http://www.youtube.com/watch?v=j-3UAv9sgxk

http://www.youtube.com/watch?v=1PwL26eXiJM

.... I'll send the guy an email when I get home from work.

 

.... by the way, the chick @ 3:13 is fawking unreal. Just thought I'd mention that!

http://www.youtube.com/watch?v=1PwL26eXiJM

 

well guys, the engine and stand are gone. oh wells.

 

dam all well, anyways i am going to look at this tommorow

 

hey rob think u can beat 400 bucks??? lol looks like ill be picking that up tommorow as long as its not all rusted out.

v6 auto 3.1L t-tops very low mileage, im thinking eaton m90/procharger p600b/or twin turbos, cars pretty muh gonna be my fab car

 

Hells no dude, I haven't updated my build thread in awhile, but I have a lot of stuff in it that still needs to go in. As it sits, the front and back seats are leather out of a 4th gen, and I'm waiting to install a set of 4th gen door panels, console, and dashboard. I haven't done the dashboard yet because I'm still working on the MS-II routing, and its obviously easier with everything off and out of the way. The GTA rims w/come with brand new front tires, and a set of brand new 16" EZ Streets for the rear that aren't even mounted yet (gonna get Paul to throw them on for me, whether I sell the car entirely or not). 4th gen aluminum driveshaft just sitting in the garage, along with a 9-bolt posi (3.27's) that I got from Frank. Everything else from my Z28 donor (new rotors, steering rack, struts w/lowered springs, etc.) are all waiting to be installed. I could get way more than four hundred just for the rims and tires lol. Definitely go for that 3.1 dude instead, as I'm just going to throw the 355 Tuned Port Motor w/700R4 that I have in the Camaro afterall then. You can still have the 2.8 if you'd like....

 

ill still take that 2.8,
i should be going to see that car around 2 pm today so aslong as its not a rust bucket its comming home with me .

quess its about time #1 had a twin lol

do me a favor rob i know ur good at locating ****, if u come across a procharger let me know, alls i need is the headunit, looking for a p600b, d1/p1sc will prolly be to big

 

ah dude, i need that chin spoiler!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

The 355 w/TPI was just shoehorned into the Camaro, I don't remember the condition of the 700R4 that was bolted up to it, but I'll find out soon enough though lol. The 2.8 w/tranny, ECM, wiring w/sensors, is yours if you'd like. I know a guy that is selling a Vortech head unit that I was going to buy a few years back, and I'm pretty sure he still has it avail....

 

might have a lead on a d1sc