Timing problem
Thread Starter
Junior Member
Joined: May 2011
Posts: 10
Likes: 0
From: Caledonia MI
Car: 89 RS
Engine: 2.8
Timing problem
After replacing timing chain and gears I set the timing to 10 deg with the tan/blk wire unplugged, it will idle ther but lags when given gas. I plugged the wire back in and cleared the codes, now it wont idle but revs up good? Its an 89 RS with a 2.8 it was running very good before the chain broke.
Thread Starter
Junior Member
Joined: May 2011
Posts: 10
Likes: 0
From: Caledonia MI
Car: 89 RS
Engine: 2.8
Re: Timing problem
Replaced pickup coil and she's up and running. Found a good video on youtube for replacing it. Why didn't they use more manly wires on these things?
Last edited by amarkew; Jun 28, 2011 at 10:43 AM.
Thread Starter
Junior Member
Joined: May 2011
Posts: 10
Likes: 0
From: Caledonia MI
Car: 89 RS
Engine: 2.8
Re: Timing problem
http://youtu.be/K5QRK9VZwcM is the pickup coil replacement video part 1, dont really need part 2 its just the reverse order reassemble.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
db057
TBI
10
Aug 11, 2015 10:11 PM
