i have a 92 rs with 7730 azty ecm and a cable i purchased from aldlcable.com, i have checked comports and so on and from looks of it every thing should be running but... it doesnt lol so ant help would be nice just wanna log data for now but even do that!!! help please! lol

 

Have you loaded the correct ADS or ADX?

 

Heres the Stock Bin, ADF, and ADX if you dont have them. ADX is for tunerpro version 5

All the files are in the zip folder.

 

okay i did not have the right adx which im sure didnt help lol now i just cant get the program to bring up and live data

 

Is it tunerproRT V5??

When you start, make sure you have the cable connected to the car and the car ignition off. Or just connect the cable to the laptop, it doesnt need to be connected to the car. Do this before you open the tunerpro program up.


Then go to the TOOLS tab, go to the bottom and click PREFRENCES, then click the far right tab that says DATA ACQ/EMULATION, then click the CONFIGURE PLUG IN COMPONET then look at the com ports and swich if needed to so that when you click the TEST FOR VALID USER INTERFACE USER SETTINGS, that is shows the cable is properly working.

Do that first to make sure the com ports are right and the cable is connected to tunerpro....

 

if i do it that way it will not recognize the cable is plugged in .... haha why cant stuff be simple?

 

Try changing the com port on tuner pro.. under the (check for cable/TEST FOR VALID USER INTERFACE USER SETTINGS ) See if that helps

 

Alright man thank you for all the help I will take a look in the morning and post with results