Pics of your wheels
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 71
Likes: 0
From: Cedar Rapids, Iowa
Car: 1982 Z28 Camaro
Engine: 362
Transmission: th350
Axle/Gears: 10bolt 3.42s
Pics of your wheels
searched for threads with just pics of wheels and your cars but only came up with some okay stuff. lookin into gettin some new wheels for my z28 and was wondering how different wheels looked on a camaro.
so if you could, would ya mind showin me some pics of your rides? thanks everyone for your help!
also i there is a thread i missed, i would be more than happy to be redirected. thanks again!
adam
so if you could, would ya mind showin me some pics of your rides? thanks everyone for your help!
also i there is a thread i missed, i would be more than happy to be redirected. thanks again!
adam
Supreme Member
iTrader: (29)
Joined: Sep 1999
Posts: 1,410
Likes: 2
From: Location, Location!
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: Pics of your wheels
ROH ZS 17x8.5 with 255/45, 17x9.5 with 285/40
Senior Member
iTrader: (2)
Joined: Jan 2007
Posts: 733
Likes: 1
From: jackson new jersey
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: Pics of your wheels
stock 91 92 camaro rims painted by me. spray can actually, and they turned out nice. a lil dirty in pics but polish up nice
Senior Member
iTrader: (2)
Joined: Jan 2007
Posts: 733
Likes: 1
From: jackson new jersey
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: Pics of your wheels
this was my cheap way of making my stock wheels look "hotter" then the orignal
Supreme Member
iTrader: (7)
Joined: Aug 2005
Posts: 1,068
Likes: 1
From: Ohio, near columbus
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: Pics of your wheels
these are shelby torq thrust m's in chrome obviously. 17-8s
this gives you a better idea of the stance next to my buddies truck (still needs an inch or so knocked out of it to look good)
Last edited by flaming-ford; Dec 4, 2009 at 01:05 PM.
Junior Member
Joined: Dec 2009
Posts: 3
Likes: 0
Trending Topics
Junior Member
Joined: Sep 2009
Posts: 24
Likes: 0
From: trinity.AL
Car: 88 iroc convertible
Engine: 305tbi
Transmission: t5 5-speed
Axle/Gears: 4th gen, 3.23 posi disc brakes
Re: Pics of your wheels
Senior Member
Joined: May 2006
Posts: 583
Likes: 69
From: Pittsburgh, PA
Car: 91 Formula
Engine: 2012 LS9
Transmission: 4L80E
Axle/Gears: Strange 60 3.54:1
Re: Pics of your wheels
They are 17x9 with 5.95" BS. They will hit the tie rods if you have the stock brake setup & need at least a 1/2" spacer to be safe, plus you need bearing dust cover/spindle modifications for clearance because the wheel is too thin in the center.
With a 1LE brake setup, they will clear the tie rods, but the inside of the wheels still hit the bearing dust covers. I actually run one of the rear factory spacers on the front with C4HD brakes.
With a 1LE brake setup, they will clear the tie rods, but the inside of the wheels still hit the bearing dust covers. I actually run one of the rear factory spacers on the front with C4HD brakes.
Supreme Member
Joined: Jan 2004
Posts: 1,206
Likes: 4
From: Western Ky
Car: Z/28..39 Plymouth truck in progress
Engine: S/B
Transmission: Manual
Re: Pics of your wheels
Centerlines.....I have the back cap done with the inlay same as the second picture, gotta get time to get the tires off and do all the rest of the rims 
Supreme Member
Joined: Apr 2006
Posts: 4,482
Likes: 9
From: Northern, CA
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: Pics of your wheels
Kinda old school...
Last edited by Ron U.S.M.C.; Feb 3, 2010 at 11:14 PM. Reason: add image
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
Mar 18, 2019 08:29 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
Aug 19, 2015 02:55 PM
