3rd gen camaro with 5th gen wheels - pics

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2019 | 09:39 AM

#351

Michael Terra

Junior Member

Joined: Jul 2019

Posts: 1

Likes: 1

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by jersyboyy

Hey tekkitan I FINALLY GOT THEM ON AND PICS TO BOOT!! This ones for you brother!
255/30/20's all around car is dropped 2 inches on dropzone springs

What it take to put the 5th gens on!?!?!?! Cant find a solid answer

Sep 5, 2024 | 08:18 PM

#352

UndercoverSS

Junior Member

Joined: Aug 2024

Posts: 3

Likes: 0

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by stang69

i put a set of camaro ss wheels on my 1988 gta an they look great . i am currently using 1.25" all four tires but i think i need to get 1.5" adapters on the front because the center cap is bulging out a little bit. also needd to get pontiac center caps.

ok i got the right adapters and correct center caps but i left 1.25" adapter in the rear and fronts are 1.5" adapters
Attachment 218811

Attachment 218810

Are these 20"?

Sep 9, 2024 | 08:27 AM

#353

UndercoverSS

Junior Member

Joined: Aug 2024

Posts: 3

Likes: 0

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by UndercoverSS

Are these 20"?

Did you just use spacers or did you have to install lug adapters to make them the right lug pattern?

May 14, 2025 | 05:06 PM

#354

Danruffing

Junior Member

Joined: Apr 2025

Posts: 13

Likes: 1

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by stang69

is that all you needed to do was the adapters? I just got some 2017 20 inch ss wheels to put on my 87 iroc and the hub is to small to go over the hubs on the car and of course the rims are to wide without being spaced but im trying to decide how thick to get without my tires sticking outside the fender.

May 14, 2025 | 05:34 PM

#355

Danruffing

Junior Member

Joined: Apr 2025

Posts: 13

Likes: 1

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by PhilRenato

Thanks to everyone for the pics, conversation, and details. Just put mine on. Ended up using 245 35 20s on the front, and 255 35 20s on the back. With 1.5" spacers. The hubs bent the caps in the front - so may need another .25" at some point.

so 1.5 inch spacers is all I need to fit the newer camaro rims on my 87 iroc? I just bought 2017 20 inch ss rims but other than needing spaced they definitely dont fit over the hub

Jan 19, 2026 | 08:18 AM

#356

92slowRS

Junior Member

Joined: Jan 2026

Posts: 1

Likes: 0

Re: 3rd gen camaro with 5th gen wheels - pics

Ive been running 5th gen wheel on my 92 for a couple months now. Has anyone figured out getting then hub centric. The spacers would need to adapt a 70.3 mm hub to a 66.9mm hub. Im getting a good vibration and im pretty sure this is why. Lug centric isn't that great. I can machine a set of spacers to work but would rather just buy them if possible.

Mar 17, 2026 | 08:24 PM

#357

V Series

Junior Member

Joined: May 2025

Posts: 14

Likes: 2

From: Phoenix

Car: 1990 Iroc

Engine: L98 5.7 350 TPI

Transmission: 700R4

Axle/Gears: 3.23

Re: 3rd gen camaro with 5th gen wheels - pics

Quote:

Originally Posted by 92slowRS

These should work for you

Amazon

While these are 70.1mm I dont think it will make much difference

Edit I dont think this design would work actually. There would need to more of a sleeve that sits inside the wheel adapter that then allows the 66.9 Bore diameter of the wheel to sit on.

Last edited by V Series; Mar 17, 2026 at 08:53 PM.