Third Generation F-Body Message Boards
0 2015/03/24 19:47:50
Not that I'd so something as crazy as order a microsquirt just to got a vss signal into the megasquirt... ;-) Of course, if you look at some of the other parts and some of the other things I've mentioned I'm working on for the thing...
Not that I'd so something as crazy as order a microsquirt just to got a vss signal into the megasquirt... ;-) Of course, if you look at some of the other parts and some of the other things I've mentioned I'm working on for the thing...
0 2015/04/08 04:58:47
Not that I'd so something as crazy as order a microsquirt just to got a vss signal into the megasquirt... ;) Of course, if you look at some of the other parts and some of the other things I've mentioned I'm working on for the thing...
Not that I'd so something as crazy as order a microsquirt just to got a vss signal into the megasquirt... ;) Of course, if you look at some of the other parts and some of the other things I've mentioned I'm working on for the thing...
0 2015/04/08 05:06:24
What's the first thing you would do if you were presented with a neat little package?
What's the first thing you would do if you were presented with a neat little package?
0 2015/04/08 05:06:30
0 2015/04/08 05:06:39
0 2015/04/08 05:06:49
0 2015/06/18 11:44:39
when I say I modified the reservior on the pump, all I did was added the hole on the rh side like most other saganaw pumps have and used the existing threaded boss/added the correct o-ring seal, nothing special. I think I can just buy an '80's/90's truck pump and get the hole already there. The reason I bothered swapping is because I had 3 good (no more) 3rd gen pumps sitting around.
when I say I modified the reservior on the pump, all I did was added the hole on the rh side like most other saganaw pumps have and used the existing threaded boss/added the correct o-ring seal, nothing special. I think I can just buy an '80's/90's truck pump and get the hole already there. The reason I bothered swapping is because I had 3 good (no more) 3rd gen pumps sitting around.
0 2015/09/04 11:57:18
0 2015/09/04 11:57:23
this is what my bracket looks like and why I needed to add that hole so I could use the boss..
this is what my bracket looks like and why I needed to add that hole so I could use the boss..
0 2015/09/04 11:57:29
0 2015/09/05 12:52:23
0 2015/09/05 12:52:30
0 2015/09/05 12:52:38
0 2015/09/17 03:15:08
0 2015/09/17 21:53:19
0 2015/09/17 22:16:57
0 2016/08/10 17:52:19
0 2016/08/10 18:01:04
Aluminum LT1 heads on a stock bottom end 305
Aluminum LT1 heads on a stock bottom end 305
0 2016/09/15 00:12:54
0 2016/09/15 14:26:47
0 2016/09/15 14:26:58
0 2016/09/15 22:39:54
0 2016/09/16 10:30:41
0 2016/09/16 10:32:06
0 2016/09/16 11:01:57
0 2016/09/22 22:20:09
0 2016/09/22 22:58:28
LEDs added to either side of the fixture
LEDs added to either side of the fixture
0 2016/10/18 05:32:30
Lit up, it might not be obvious in this picture but it is more evenly lit than with just the bulb
Lit up, it might not be obvious in this picture but it is more evenly lit than with just the bulb
0 2016/10/18 05:32:39
Reassembled
Reassembled
0 2016/10/18 05:32:50
0 2016/11/03 05:13:47
0 2016/11/03 05:14:23
0 2016/11/13 14:02:05
Cutout and primed from underneath. The corners are 2" radius holes, they just look funny because they go through the floor contour. I covered any exposed metal with etching primer.
Cutout and primed from underneath. The corners are 2" radius holes, they just look funny because they go through the floor contour. I covered any exposed metal with etching primer.
0 2017/05/18 04:36:32
Just so you can see how the LS1 plastic tank fittings line up. I had the AN line adapters but they were didn't work as well as you'd expect. The FI style hose and clamps hold really well.
Just so you can see how the LS1 plastic tank fittings line up. I had the AN line adapters but they were didn't work as well as you'd expect. The FI style hose and clamps hold really well.
0 2017/05/18 04:36:38
this was done about 2am a the end of my driveway... rivnuts installed, gasket made... I didn't have any of the right color touch up paint. Yes, I am sitting on the hump straddling the thing.
this was done about 2am a the end of my driveway... rivnuts installed, gasket made... I didn't have any of the right color touch up paint. Yes, I am sitting on the hump straddling the thing.
0 2017/05/18 04:36:45
0 2017/05/22 08:56:21
0 2017/05/22 08:56:24
0 2017/05/23 16:51:08
Cutting the slot, the nut for the adjustment screw is sitting in the foreground.
Cutting the slot, the nut for the adjustment screw is sitting in the foreground.
0 2017/05/23 16:51:52