Third Generation F-Body Message Boards
0 2018/05/14 03:06:07
0 2018/05/14 03:22:39
0 2018/05/14 03:35:00
0 2018/05/14 03:36:28
0 2018/05/14 03:44:20
0 2018/05/14 03:59:43
0 2018/05/14 03:59:51
Next to the original GM sub amp. If you include the bracket they are surprisingly close in size
Next to the original GM sub amp. If you include the bracket they are surprisingly close in size
0 2018/05/14 04:00:59
Location for the original sub amp, it's tight but there's enough room there for everything and it doesn't overheat.
Location for the original sub amp, it's tight but there's enough room there for everything and it doesn't overheat.
0 2018/05/14 04:02:12
The 8awg wiring, RCA's, the speaker wiring part of the original harness... all tuck under the dash trim panel.
The 8awg wiring, RCA's, the speaker wiring part of the original harness... all tuck under the dash trim panel.
0 2018/05/14 04:03:50
0 2018/05/14 04:08:47
0 2018/05/14 04:09:33
0 2018/05/14 04:25:30
broken 'bird at the top, camaro at the bottom
broken 'bird at the top, camaro at the bottom
0 2018/05/14 17:26:42
bracket rivets drilled out and bracket sitting next to the handle
bracket rivets drilled out and bracket sitting next to the handle
0 2018/05/14 17:26:54
0 2018/05/18 03:49:51
0 2018/05/21 03:23:07
0 2018/05/21 03:23:20
0 2018/05/21 03:23:30
0 2018/05/21 03:23:38
0 2018/05/21 03:23:47
0 2018/05/21 03:23:52
0 2018/05/22 17:29:13
0 2018/05/29 15:36:48
A small pocket that a commodity SPST switch is designed to snap into.
A small pocket that a commodity SPST switch is designed to snap into.
0 2018/06/04 02:45:31
what it looks like from the front
what it looks like from the front
0 2018/06/04 02:45:41
0 2018/06/04 02:45:47
cover printed for the switch
cover printed for the switch
0 2018/06/04 02:45:53
Now I have a big red switch for my printer lighting
Now I have a big red switch for my printer lighting
0 2018/06/04 02:45:57
0 2018/06/04 02:46:06
The whole thing installed on the printer power supply
The whole thing installed on the printer power supply
0 2018/06/04 02:48:49
Test fitting the original design to see how it fits up in the dash contours
Test fitting the original design to see how it fits up in the dash contours
0 2018/06/04 02:56:51
Another angle
Another angle
0 2018/06/04 02:56:55
Sanded, painted and a smoked plexi lens added to it
Sanded, painted and a smoked plexi lens added to it
0 2018/06/04 02:58:09
Partially lit up at night (I set the shift rpm to something liow to gt it to show more lights at a lower rpm than normal, the leds go to orange then red, matching the atari dash and then they all flash when you it the shift point)
Partially lit up at night (I set the shift rpm to something liow to gt it to show more lights at a lower rpm than normal, the leds go to orange then red, matching the atari dash and then they all flash when you it the shift point)
0 2018/06/04 02:58:15
Driver's side
Driver's side
0 2018/07/22 05:16:31
Passenger's side, shot at a weird angle but is measured straight.
Passenger's side, shot at a weird angle but is measured straight.
0 2018/07/22 05:17:48
Passenger side, I didn't bother uploading the driver's side since it's literally identical.
Passenger side, I didn't bother uploading the driver's side since it's literally identical.
0 2018/07/22 05:21:59
0 2018/07/22 05:36:52
0 2018/07/24 01:20:24