I have some parts forsale on another site called fastgm.com located in forsale/wanted section if anyone is looking for some stuff. I do have a HSR kit and some MSD stuff as well on there. All parts were taken off of a 91 camaro unless noted as new. I have some close up shots as well if needed. prices are on the fastgm site. I will do my best to keep viewing this thread but its new to me so I may not get to you as fast as the other site.

I also would like to add that I have a Demon 830 carb. that I had on the camaro a few years back before I went FI. This Carb. has approximately 500 miles on it and has the mechanical secondaries. this was the drag race model that was offered by Jegs when I purchased it. Looking for $400/BO for the demon. Thanks Joe

 

would it be possible to get someone to move this to the classifieds? since i am new i dont have the previlage to post in there yet. thanks

 

how much for the stud girdles and are those roller lifters?

 

how much for the intake/Manifold set?

 

mightymouse: the (Dart)stud girdles are listed for a 100 bucks. Not sure what you are reffering to but I dont have any roller lifters forsale in those pics. I do have roller rockers though which are 7/16 Crane Golds that havent been installed on anything. Those are $250


Kamorov: I really want to keep the stealth ram set together. I think that it would be really hard to sell just the commander 950 as a stand alone item. I will let it go for $1300 with 19# inj. If you are just wanting the manifolds I believe that you can purchase that from summit for around $700 without anything else you will have to call them to verify this.

 

Are the stud girdles for a 3/8 stud?

 

Yes Sir, I had them installed on a set of cranes that are 3/8.

 

no, I meant it ALL MSD, Stealth Ram, EVERYTHING!

 

Oh ok, well heres what I have:
HSR w/comm. 950 - $1300
Holley 58mm TB - $275
36# Injectors - $125
MSD Distributer - $150
MSD Blaster 2 coil - $20
MSD Digital 6 plus box - $250
Csr anodized thermostat housing - $50
= $2170 (I will let this stuff go 4 $2000 together)

I also have:
TPI air filter housing - $75
3rd gen dual el. fans - $75
i will let these 2 items go with the above items for $100

anything else that I need to list? I have individual pics of most everything if needed to email.

 

How much for the valve covers?

 

Where in the SE are you located? Interested in the fans. LMK thanks.

 

Bigseth: I am looking at getting $150 for the valve covers


tweek: I am located outside of charleston SC, you can have the fans for $75

Joe

 

dam i need some fans but wasn't really looking to drive to SC to pick em up. Anyway they can be shipped and can I get a quote? Still interested.

 

tweek: I have some realitives come into town for a few days. I will try to remember to get some info. on shipping hopefully on thursday.

 

Finally...I can post in here, I still have this stuff forsale for now. If things go the way that I would like them to then all parts will be kept.....anyways TTT

 

Did you get that shipping quote on those fans? LMK thanks.

 

how much you asking for IROC emblems.

 

tweek I will ship the fans for 30 bucks if you still are going to want them. I had thought about using them on my truck but it may never happen.

mikieman I am looking for $25 plus 5 bucks to get them shipped to ya. these are not new and will require some type of adhesive to get them to stick. I would suggest using Goop. it works really well.

 

I'll take em for $30 shipped. do you have paypal, what is paypal email.

 

Joe,

Thanks for the TPI airbox. Everything arrived today and is SUPERB. It was great doing business with you.

 

Is the msd distributor a 8366 model?

 

sorry John this dist. is not the model that you were looking for. this is the mechanical adv. style, part # 85551 in the summit catalog.
I need to update my list since I have since purchased a boat am know using the ignition products. I am still thinking of selling the MSD digital box since I dont need the extra features compared to a MSD 5 or 6 box.

 

I know you said earlier you wanted to keep the injection system together because the commander 950 might be hard to sell alone. I was wondering if you may consider selling the commander 950 alone and also what is the part number (I'm pretty sure I know which one it is but would like to make sure). Thanks


-Russ

 

if tweek doesnt want the fans i do if they both work.

 

I dont have a part # for you on the commander 950 but it is the same as the one found on summit online. part #hly-91504201
this is the one that doesnt have the wide band oxygen sensor. this kit was purchased before those expensive ones came out. I could possibly let the 950 & harness go without the plenums and other stuff. shoot me an offer and I will think about it.

bodie: I havent heard from tweek since the his last post. I was supposed to get him a qoute but I had forgotten about it due to family coming into town then. both fans were working when pulled.

 

pm sent ..

 

still looking to sell some of this stuff.

 

you have the commander setup still? very interested i posted yesterday in the wanted section for something like that...i just got and hsr myself how much you want?

 

I still have the commander 950 and harness. Pmgm has been pm'n me about this and he has the first chance. you will be second. I havent heard from Pmgm since the other day.
pm me your offer and I'll let you know as soon as I can if it has been sold or not. I want to be as fair as possible but I also dont want to miss out on a sale.
thanks for your interest and good luck

 

I sent you a pm i need mailing address pm it to me thanks...

 

back to ya Pm

 

ttt....looks like the commander 950 is sold. waiting on payment.
I still have the HSR upper and lower plenums with Holley 58mm throttle body and adj. fuel regulator and both sets of injectors. Have the other parts as well.
I am looking for a set of Big Block Chevy roller rockers. I would like to trade my New Crane Gold 7/16 1.5 roller rockers for the big block ones if possible.

 

ttt...fellas