lots of parts i don't need
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
lots of parts i don't need
I just took delivery on a new project yesterday and the car came with lots of very good parts that i don't need for what i'm doing. They include but are not limited to a sandblasted and POR15ed 9 bolt borgewarner axle housing. 12" PBR rear brakes, extra TPI runners and plenum from an 89 305. powdercoated LCAs with energy suspension bushings. I also have a rotating assembly from a 400 that includes a set of 30 over pistons, stock rods and a recently polished crank. There is also a bell housing for a T56 to LS1 in the garage i don't need. There were also 2 full interiors with the car so some of that stuff is up for grabs let me know if anybody wants anything at all. I haven't even gone through all the boxes yet so i probably have it and don't even know it
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
I'm located right near albany New York postal code 12054. Depending on how they were shipped it might not be that bad send me your zip code and i'll weight the stuff and get a quote if your interested. Along with some pics of course
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
do you want just the housing or the axles too??
Trending Topics
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
I would like to get 200 + shipping for the axles and the housing. The brakes I'm asking 300 I'll have pics up friday night when i get home
Junior Member
Joined: Jan 2008
Posts: 4
Likes: 0
From: Lexington, SC
Car: 1986 IROC
Engine: 305
Transmission: 700R4
Re: lots of parts i don't need
Interested in interior parts:
Seats belts, upholstery, panels, radio, carpet, etc... Pics of what you have would be great.
Thanks,
Tim
Seats belts, upholstery, panels, radio, carpet, etc... Pics of what you have would be great.
Thanks,
Tim
Junior Member
iTrader: (2)
Joined: Dec 2007
Posts: 23
Likes: 0
From: Kernersville NC
Car: 86 camaro iroc-z and 91 s10
Engine: 305
Transmission: 700r4
Re: lots of parts i don't need
what color is the interior i need the rear panel and latch the cover the pull down motor and i need the bolts and such shipped to 27284. thanks pm me thanks and heres a pic. and i need that door that cover that panel on the drivers side u can see it in the pic.
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
unfortunetly it looks like your interior is tan and everything that i have is black
Junior Member
iTrader: (2)
Joined: Dec 2007
Posts: 23
Likes: 0
From: Kernersville NC
Car: 86 camaro iroc-z and 91 s10
Engine: 305
Transmission: 700r4
Re: lots of parts i don't need
dang ok thanks r the any of them t-tops? if they r how much for the headliner ill take that if its not to much dosnt matter if its black.
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
got some pictures of various things up the link is http://s244.photobucket.com/albums/g...bum/?start=all
Joined: Dec 1999
Posts: 3,544
Likes: 19
From: WI,USA
Car: 89 FORMULA 350, 91 Z28 Convertible
Engine: ls1, LB9
Transmission: t56, Auto
Axle/Gears: S60/ 3.73
Re: lots of parts i don't need
how much for the ls1/t56 bellhousing? where you located? I wouldn't mind getting a spare one
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
So I had offers on just about everything here and the people either have stopped responding or can't afford the stuff anymore so somebody make an offer on any of these parts I just don't need them
Member
iTrader: (2)
Joined: Sep 2006
Posts: 240
Likes: 0
From: pa
Car: 86 Iroc-Z
Engine: 310ci soon to be 355ci
Transmission: built 700r4
Axle/Gears: I think 3.08s
Re: lots of parts i don't need
What year and what size motor did the Fuel Rail and plenum come off of? What do you want for the runners and everything else If im interested?
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
unfortunetly the zipper on the extra bag is completely shot and won't even close so i just threw it out. The extra interior pieces with the exception of a lower console I have a deal pending on
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
sorry sale pending on both of them, but i'll pm you if anything changes
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
the TPI setup i'm looking to get 250 for, but there is a sale pending on it i'll pm if it that doesn't go through
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
i don't actually have a spare, I would just go to the parts store and pick one up for a couple bucks its much easier
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
not willing to break up the set as of yet. If you want make me an offer on the full set
Re: lots of parts i don't need
pics of console lid and dash pad to wheidt@yahoo.com . Shipping to 46041?
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
sorry sold the extra dash pad and entire center console locally a few days ago
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
50+shipping is the asking price pm if your interested
Last edited by WIll36; Feb 20, 2008 at 04:13 PM.
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
Yes I still have it, but I have a sale pending on a built LS T56 and it will be going with that transmission if the deal goes through. I'll PM you if it becomes available.
Thread Starter
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: lots of parts i don't need
andresinibus the only extra interior pieces I have right now are some assorted seatbelt parts, a spare dash(not the pad), a set of red sail panels and a center console. If your interested PM me
irocbrninrubber yes they are just a set of stock stamped steel arm arms powder coated black with red energy suspension bushings in them I would like to get $30 for them PM me if your interested as well.
I can have pics of the LCAs in a day or so but interior stuff not until this weekend we're in the middle of some remodeling at home and certain parts are packed away
irocbrninrubber yes they are just a set of stock stamped steel arm arms powder coated black with red energy suspension bushings in them I would like to get $30 for them PM me if your interested as well.
I can have pics of the LCAs in a day or so but interior stuff not until this weekend we're in the middle of some remodeling at home and certain parts are packed away
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM










