[PA] 350 TPI parts plus more
Thread Starter
Junior Member
iTrader: (1)
Joined: Sep 2002
Posts: 25
Likes: 0
From: Mechanicsburg, PA
Car: 86 Iroc
Engine: 420HP/440FT-LB SB355
Transmission: 700R4
Axle/Gears: 10 Bolt 3.73
350 TPI parts plus more
Spring cleaning has arrived so here goes the list of items I have for sale. I have pictures of all this as well. This was all taken off of a running 88 IROC with a GM 350 crate motor which sat for a number of years while I have been off at college/deploying and in training. I parted the rest of the car out so this is what is left. I accept money orders or pay pal. Everything is as is + shipping.
Stock 350 Runners - Make offer I want them gone
SLP Runners (includes the bolts) - $225
Fuel Rail with 22# injectors with crane adjustable fuel pressure regulator. -$125
Stock Throttle Body - with mild porting to smooth the walls out. - Make offer
EGR adapter - $30
Overhead console for T-Top (has flashlight as well) - $25
145 Speedo gauge cluster (one fully functional, and I have another where the speedo crapped out and the needle is broken off, however the rest of the guages worked when I pulled it out. The functional one has bezel as well) - $100 for both
quarter panel ground effect pieces - $15
Rear brake light license plate light assembly - $10
Brand new GM 350 Harmonic Balancer - $50
Brand new SPOHN powder coated gloss black SFC's - $150
Edelbrock #6872 headers - $50
No reasonable offer will be refused and this stuff NEEDS to go. I prefer to be emailed at rockbrigade@hotmail.com.
Stock 350 Runners - Make offer I want them gone
SLP Runners (includes the bolts) - $225
Fuel Rail with 22# injectors with crane adjustable fuel pressure regulator. -$125
Stock Throttle Body - with mild porting to smooth the walls out. - Make offer
EGR adapter - $30
Overhead console for T-Top (has flashlight as well) - $25
145 Speedo gauge cluster (one fully functional, and I have another where the speedo crapped out and the needle is broken off, however the rest of the guages worked when I pulled it out. The functional one has bezel as well) - $100 for both
quarter panel ground effect pieces - $15
Rear brake light license plate light assembly - $10
Brand new GM 350 Harmonic Balancer - $50
Brand new SPOHN powder coated gloss black SFC's - $150
Edelbrock #6872 headers - $50
No reasonable offer will be refused and this stuff NEEDS to go. I prefer to be emailed at rockbrigade@hotmail.com.
Last edited by USAFIROC88Z; Apr 10, 2010 at 02:31 PM.
Member
Joined: May 2008
Posts: 377
Likes: 0
From: MN
Car: 86 Z28
Engine: 350 TPI
Transmission: T56
Axle/Gears: 3.42 posi
Re: 350 TPI parts plus more
do you know if the chip will work with my 86 car when i swap a 350 in? If so i will take it. How much shipped to 55304?
Thread Starter
Junior Member
iTrader: (1)
Joined: Sep 2002
Posts: 25
Likes: 0
From: Mechanicsburg, PA
Car: 86 Iroc
Engine: 420HP/440FT-LB SB355
Transmission: 700R4
Axle/Gears: 10 Bolt 3.73
Re: 350 TPI parts plus more
I assume you are referring to the the SLP runners? Here they are, they were installed.
Member
iTrader: (2)
Joined: Apr 2003
Posts: 327
Likes: 0
From: Manahawkin/Hackensack, NJ
Car: 1987 IROC-Z
Engine: 305 LB9
Transmission: 5 Speed
Axle/Gears: 3.70 Posi BW 9 Bolt
Re: 350 TPI parts plus more
I can find the part # for those headers do you have pics of them?
Trending Topics
Thread Starter
Junior Member
iTrader: (1)
Joined: Sep 2002
Posts: 25
Likes: 0
From: Mechanicsburg, PA
Car: 86 Iroc
Engine: 420HP/440FT-LB SB355
Transmission: 700R4
Axle/Gears: 10 Bolt 3.73
Re: 350 TPI parts plus more
ECM is sold, just awaiting the money order. As far as the headers, I'm not sure they make them anymore when I went looking around for them prior to posting them on here. I have a few pic's of them and can get more if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
