I am going in another direction with my build so I have to get rid of the parts I'm not going to be using. These parts were all going to be used on my 92 Z28 with a 5.7.

I have a set of Edelbrock performer heads. They are in like new condition and haven't been run since they came back from the machine shop. I will sell them with a set of new Edelbrock head bolts, new spark plugs and a set of exhaust manifold gaskets. The heads have been gasket matched to a Fel pro 1206 intake gasket. The part number for the heads is 60859 if you would like to look up the specs.

$800 plus shipping ($50)----SOLD

I have alot of MSD stuff. I have a 6AL ignition, coil adaptor harness, brand new set of 8.5 plug wires, half of another set. A blaster 2 coil and mount that is brand new and a stock distributor that has an MSD cap and rotor.


$300 for all of the MSD parts, plus shipping. ($30)----SOLD

Finally just a few odds and ends.

A set of underdrive pulleys (used). I believe they are made by March.-------SOLD
A 160 degree T-stat (new)-----SOLD
A brand new air fuel ratio gauge. It's a Pro com ultra light.
A set of brand new Pro form valve covers. (with bolts)------SOLD
2 brand new K&N air filters for the stock intake set up.
A brand new Lokar Hi tech TPI throttle cable.
A Lokar stainless steel braided dipstick. It was installed in my engine but never ran.

These parts are "Make an offer" plus shipping.


I tried uploading pics but it didn't work. I can email pics if needed.

 

how much for the air to fuel gauge?? and is it black faced??

 

I'd take $30 for it plus shipping and it is the 2 1/16 silver faced gauge.

 

I'm interested in the tstat, underdrive pulleys, and maybe the valve covers. Do you have pics of the valve covers?

 

id like to see the valve covers too, are the perimiter bolt or center bolt?

 

I do have pics of the parts. I tried posting them on here but for some reason it wouldn't work I think email would work the best right now for getting pics.

The valve covers are the center bolt type.

Forgive me for taking a bit to reply to pm's and the thread. I don't have alot of time to check my email and the site lately, but I will reply. Just shoot me a pm with an email and I will send pics, or just email me directly.

Thanks,
Zach

 

my emails Ledzepp1fan@aim.com id like some pics of the air to fuel gauge thanks.

 

How much for the kn air filters?

 

$20 plus shipping sound ok for the filters?

 

The underdrive pulleys are sold pending payment.

 

I was finally able to resize the pics I have.

 

The air fuel gauge.............

 

I also have the stock serpentine belt, accessorie mounts for sale as well.
Make an offer.

 

Make a reasonable offer for any of the parts.

 

PM sent

 

All the MSD stuff and stock distributer are sold pending payment.

 

pm'd on a/f gauge

 

MSD parts still available..............

 

how much you want for the valve covers shipped to 76133?

 

and the a/f gauge if not already gone

 

wondering if you still had the msd 6al box and how much shipped to 76179?

 

I'd take $120 for the a/f gauge and valve covers Shipped.

I'd take $110 For the 6al box shipped.

 

pm sent.

 

I also have a B&M Mega shifter for sale as well. It has aout 500 miles or so of use on it. It will come with the shifter, cable, console plate and shift indicator plate along with the instructions. The gear indicator cable broke and the housing on one of the micro switches is broken. Other than that it works great. I used it in my car with no problems. I just had to pay attention as to wich gear I was selecting.

Make an offer.

 

are the valve covers still for sale? how much if i pick them up? I'm the one at Ft. Rich. thanks

 

I could do $90. I'd meet you in Anchorage since I work there anyways.

 

PM and email sendt about heads, valve covers and MSD :-)

 

Ok the following parts are sold pending full payment.........


Edelbrock heads, gaskets, spark plugs and bolts.
160 degree t-stat
MSD 6al ignition and coil adaptor harness.
The new coil and mount.
The Pro form valve covers.
The full set of MSD wires.



The half set of MSD wires are also sold.

Thanks,
Zach

 

Just a few things left. Need em gone.

 

What all is left

 

Pro comp air fuel gauge (new)
K&N air filters (new)
Lokar braided dipstick. Was installed but never ran.
Lokar braided throttle cable. (new)
Stock TPI distributer, used.
B&M mega shifter, few hundred miles
The stock engine accessorie mounts.

That's all that's left.

Make an offer

 

Ok, wish I would have had time to go up and get those valve covers from ya. O well my loss lol. Good luck on the sell. Hopefully I'll see ya out and about in the summer in yours?

 

Thanks, but it's gonna be awhile. I might have mine on the road again in 2 years or so. Not much time or money to work on it. I'm not in any real rush, but it sure would be nice though................

 

Yea I understand that, if ya need a hand with anything just let me know, I am always up to learning new things and helping out.

 

do u still have the k& n filter and The stock engine accessorie mounts how much to ship to fl 33137

 

If you still have the TPI cable, how much would you like for it?
Jon

 

With international shipping charges it would be cheaper to buy it from a dealer.

 

Sent a PM, I'm not a computer guy so I'll double up on info. The KN air filters shipped to 95636. Thanks.

 

The air filters are sold........

 

probably more then expected but what the heck, mega shifter shipped to 98043?

 

$95

 

PM sent for guage.

 

Ill take the gauge. Lowest on B&M?

 

I'll let the gauge go for $25 plus $5 shipping. I'm afraid the shifter is sold.