Aftermarket Vendor Review Provide questions and comments about aftermarket part vendors for the Third Gen F-Body.

https://bigbrakeupgrade.com/

Thread Tools
 
Search this Thread
 
Old 07-28-2021, 04:32 PM
  #1  
Moderator

Thread Starter
 
IROCThe5.7L's Avatar
 
Join Date: Jul 2001
Location: Buffalo, NY
Posts: 5,193
Received 58 Likes on 39 Posts
Car: 1988 IROC-Z
Engine: 427 SBC
Transmission: ProBuilt 700R4
Axle/Gears: Moser 12 Bolt / 3.73 TrueTrac
https://bigbrakeupgrade.com/




Great experience. Good guy, very knowledgeable. I almost pulled the trigger on LS1 brakes. Then Hawks came out with the 17" replica wheels. So I was able to throw even larger brakes on. I went with the C6 brakes. I have lower vacuum do to my large cam. So the stock brakes sucked even worse than they normally do. It's night and day with this upgrade. I'd say the braking is 90% better and I am able to lock up the wheels again. I still throw the idea around of going hydro boost, but I don't feel I need it nearly as bad now.

Some before and after's:




The following 3 users liked this post by IROCThe5.7L:
Chopski (07-28-2021), scfbody (07-29-2021), TTOP350 (07-28-2021)
Old 07-28-2021, 09:14 PM
  #2  
Member
iTrader: (1)
 
Chopski's Avatar
 
Join Date: Jan 2016
Location: Midland, Michigan
Posts: 201
Received 22 Likes on 17 Posts
Car: 1989 IROC
Engine: 350
Transmission: 700R4
Axle/Gears: 3:42
Re: https://bigbrakeupgrade.com/

What was the damage on the upgrade? All inclusive bolt on kit? Fills the wheels nicely. On the "to do" list...
Old 07-28-2021, 09:48 PM
  #3  
Supreme Member
 
Reddragon88gta's Avatar
 
Join Date: Apr 2017
Location: Northern NY
Posts: 1,116
Received 401 Likes on 314 Posts
Car: 1988 Trans Am GTA
Engine: 5.7 L98
Transmission: 700r4
Axle/Gears: Borg Warner 9 bolt 3.27
Re: https://bigbrakeupgrade.com/

Same here, this might be my winter project but I will likely go with LS1s up front to keep my oem GTA wheels. I talked to Scott and supply issues are limiting some of his kits. This seems like a great upgrade for these cars.

Old 07-29-2021, 02:48 PM
  #4  
Moderator

Thread Starter
 
IROCThe5.7L's Avatar
 
Join Date: Jul 2001
Location: Buffalo, NY
Posts: 5,193
Received 58 Likes on 39 Posts
Car: 1988 IROC-Z
Engine: 427 SBC
Transmission: ProBuilt 700R4
Axle/Gears: Moser 12 Bolt / 3.73 TrueTrac
Re: https://bigbrakeupgrade.com/

Originally Posted by Chopski
What was the damage on the upgrade? All inclusive bolt on kit? Fills the wheels nicely. On the "to do" list...
$975.00 – $1,558.00 Depending on things you want to upgrade. Drilled/slotted rotors, stainless brakehoses, hub material...etc
Old 07-29-2021, 08:42 PM
  #5  
Supreme Member

iTrader: (5)
 
Thirdgen89GTA's Avatar
 
Join Date: Sep 2004
Location: Chicagoland Suburbs
Posts: 5,846
Received 213 Likes on 160 Posts
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: https://bigbrakeupgrade.com/

Yep, had a fantastic experience with him many years ago.
Old 07-29-2021, 08:45 PM
  #6  
Supreme Member

iTrader: (5)
 
Thirdgen89GTA's Avatar
 
Join Date: Sep 2004
Location: Chicagoland Suburbs
Posts: 5,846
Received 213 Likes on 160 Posts
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: https://bigbrakeupgrade.com/

Mine came all assembled and heavily saran wrapped.







The following users liked this post:
IROCThe5.7L (07-30-2021)
Old 11-29-2021, 07:26 AM
  #7  
Senior Member

 
Arctic White 91 RS's Avatar
 
Join Date: Apr 2000
Location: MidWest
Posts: 681
Received 24 Likes on 18 Posts
Car: 91 RS/ 99 T/A/ 72 Vette/ 02 Z28
Engine: LSx/ Dart400
Transmission: M6/ M6/ TH400/ 4L60E
Axle/Gears: 4.10's / 3.08/ 2.73
Re: https://bigbrakeupgrade.com/

That's a sweet set up!

Definitely will keep BBU in mind.
Old 11-29-2021, 11:07 AM
  #8  
Supreme Member

 
Buddy's Avatar
 
Join Date: May 2001
Location: Kars, Ontario, Canada
Posts: 1,261
Received 68 Likes on 58 Posts
Car: '87 FIREGOOSE!!!!
Re: https://bigbrakeupgrade.com/

Top notch service and Scott is a standup class guy. I recommend him to everyone.
Old 12-02-2021, 08:21 AM
  #9  
Senior Member

iTrader: (9)
 
zman1969's Avatar
 
Join Date: Jul 2003
Location: DFW
Posts: 582
Received 200 Likes on 142 Posts
Car: 90 Formula 350
Engine: 350
Transmission: 700r4
Axle/Gears: Dana 44 3.54
Re: https://bigbrakeupgrade.com/

I have to say I like the C6 setup! but the LS1 isnt a slouch either, stock is F-body is 10.5"x1"? IIRC and the LS1 are 12"x1.25" which is a nice increase IMO and I like the price
Old 12-05-2021, 01:28 PM
  #10  
Supreme Member

iTrader: (2)
 
jbenge's Avatar
 
Join Date: Sep 1999
Location: Danville, IN
Posts: 1,482
Received 42 Likes on 28 Posts
Car: 1991 Camaro Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: Strange 12 Bolt, 3.42
Re: https://bigbrakeupgrade.com/

I've used bigbrakeupgrade.com multiple times. Scott is a great guy who knows his stuff and produces a great product for a reasonable price. I put 4thgen fronts on one car and C5 brakes on another, both were great upgrades and well worth the money.
Old 12-06-2021, 06:38 AM
  #11  
Member

iTrader: (1)
 
GTA1990's Avatar
 
Join Date: Aug 2009
Location: London, UK
Posts: 402
Received 19 Likes on 14 Posts
Car: 1991 Trans Am
Engine: L31, LT4 hot cam
Transmission: T5
Axle/Gears: 3:43 LSD
Re: https://bigbrakeupgrade.com/

yep solid service. I went with a slight DIY approach buying some bits and modifying my own spindles. Scott was more than happy to share pointers and other guidance; never too busy though I suspect he has a lot on his plate
Old 12-16-2021, 07:15 AM
  #12  
Moderator

iTrader: (3)
 
Abubaca's Avatar
 
Join Date: Feb 2001
Location: JAMESTOWN, NC
Posts: 8,367
Received 348 Likes on 275 Posts
Car: 1988 Iroc
Engine: L98 350
Transmission: 700R4
Axle/Gears: Hawks 8.8 - 3.73
Re: https://bigbrakeupgrade.com/

Another vote for BBU, and another big thumbs up for Scott! He's a BIG help in being able to select the right product, both for performance, and what will work with the parts you already have. On my second LS1 front kit (2 cars) and I'm considering a c6 z51 upgrade here soon.
Old 12-24-2021, 05:23 PM
  #13  
Moderator

Thread Starter
 
IROCThe5.7L's Avatar
 
Join Date: Jul 2001
Location: Buffalo, NY
Posts: 5,193
Received 58 Likes on 39 Posts
Car: 1988 IROC-Z
Engine: 427 SBC
Transmission: ProBuilt 700R4
Axle/Gears: Moser 12 Bolt / 3.73 TrueTrac
Re: https://bigbrakeupgrade.com/

Just spamming another picture. The 17" rims and C6 brakes are my favorite mods I've done on this car.




Last edited by IROCThe5.7L; 12-24-2021 at 05:55 PM.
Old 12-25-2021, 08:06 PM
  #14  
Supreme Member

iTrader: (3)
 
LAFireboyd's Avatar
 
Join Date: Jan 2004
Location: Las Vegas
Posts: 2,674
Likes: 0
Received 242 Likes on 182 Posts
Car: 1987 Formula (original owner)
Engine: 305 TPI
Transmission: T5
Axle/Gears: 9-bolt/3.45
Re: https://bigbrakeupgrade.com/

All shined up for the photo op!

The larger wheels and brakes update the appearance, without sacrificing the car's heritage. It's what GM should've done mid-generation. Looks like you painted the rear calipers black to match the new fronts.

Looks great!
The following users liked this post:
IROCThe5.7L (12-27-2021)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sherman Johns
Brakes
4
05-31-2017 11:30 AM
85SILVERBULLET1
Organized Drag Racing and Autocross
19
06-06-2014 03:13 PM
Stevo
Members Camaros
51
03-10-2008 12:01 PM
S!MON
Members Camaros
9
07-29-2007 02:19 PM
zimmstoy
Suspension and Chassis
10
08-09-2001 01:29 AM



Quick Reply: https://bigbrakeupgrade.com/



All times are GMT -5. The time now is 04:59 AM.