Foose Nitrous wheels
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Alabama
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS 25th Anniversary
Engine: Built 400
Transmission: 700R4
Axle/Gears: 3.73 gears
Foose Nitrous wheels
I probably put this in the wrong seciton....
I was just wondering if anybody knew if they made these wheels that would fit a 92 Camaro RS? I looked on eBay and they have some 15s but the guy said I would need a 4.75 bolt pattern and all he had was 4.5. Just wondering if anybody knew anymore about them, cuz I have no clue, I'm learning. thanks for any help and sorry if it's a stupid question.
Katy
http://cgi.ebay.com/ebaymotors/4-15-...spagenameZWDVW
I was just wondering if anybody knew if they made these wheels that would fit a 92 Camaro RS? I looked on eBay and they have some 15s but the guy said I would need a 4.75 bolt pattern and all he had was 4.5. Just wondering if anybody knew anymore about them, cuz I have no clue, I'm learning. thanks for any help and sorry if it's a stupid question.
Katy
http://cgi.ebay.com/ebaymotors/4-15-...spagenameZWDVW
#2
Supreme Member
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,779
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
sorry those aren't going to fit. snazzy though. why 15's?
look for a set that has a 5x4.75 inch bolt pattern.
look for a set that has a 5x4.75 inch bolt pattern.
#3
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Alabama
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS 25th Anniversary
Engine: Built 400
Transmission: 700R4
Axle/Gears: 3.73 gears
That was just one set... the 15s. I was probably going to go bigger. But I didn't know if they even made them in that bolt pattern period.
#4
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Those wheels can be bought with a 5 on 4.75 bolt pattern, just need to look a little harder. I would use at least a 16" wheel to really make that style of wheel stand out.
Good luck!
Good luck!
#5
Member
Join Date: May 2006
Location: Edmonton, Alberta
Posts: 256
Likes: 0
Received 2 Likes
on
2 Posts
Car: 88 camaro
Engine: 355
Transmission: 700R4
Axle/Gears: 3.73 posi
I have 18 inch foose nitrous 2 piece wheels ( the ones without the rivets )
the 2 piece are a custom wheel you can order with any backspace and they do come in the right bolt pattern
The nitrous wheel with the rivets does come in the right bolt pattern but not the right backspacing for a camaro
the 2 piece are a custom wheel you can order with any backspace and they do come in the right bolt pattern
The nitrous wheel with the rivets does come in the right bolt pattern but not the right backspacing for a camaro
#6
Member
Join Date: May 2006
Location: Edmonton, Alberta
Posts: 256
Likes: 0
Received 2 Likes
on
2 Posts
Car: 88 camaro
Engine: 355
Transmission: 700R4
Axle/Gears: 3.73 posi
Here's the link to the thread I started on them
I was gonna just post the pic but I can't cause it's already been posted
https://www.thirdgen.org/forums/auto...t=foose+wheels
I was gonna just post the pic but I can't cause it's already been posted
https://www.thirdgen.org/forums/auto...t=foose+wheels
Last edited by camarojustin; 11-13-2006 at 06:04 PM.
#7
Senior Member
Join Date: Aug 2005
Location: Springfield, Oregon
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28, 88 GTA, 68 Cutlass S
Engine: 305TPI X2 ;), Chevy 250
Transmission: T5, 700R4, powerslide >:(
Axle/Gears: posi, and posi w/discs :D.
since foose is a custom wheel shop id think they would cater to all sizes and patterns. i know that boyd does that. call em and find out.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Alabama
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS 25th Anniversary
Engine: Built 400
Transmission: 700R4
Axle/Gears: 3.73 gears
I have 18 inch foose nitrous 2 piece wheels ( the ones without the rivets )
the 2 piece are a custom wheel you can order with any backspace and they do come in the right bolt pattern
The nitrous wheel with the rivets does come in the right bolt pattern but not the right backspacing for a camaro
the 2 piece are a custom wheel you can order with any backspace and they do come in the right bolt pattern
The nitrous wheel with the rivets does come in the right bolt pattern but not the right backspacing for a camaro
What backspacing would be required?
Katy
#12
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Alabama
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS 25th Anniversary
Engine: Built 400
Transmission: 700R4
Axle/Gears: 3.73 gears
#13
Senior Member
iTrader: (4)
Join Date: Sep 2003
Location: N. CA
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
Car: '85 TA
Engine: Aluminum Fuelie
Transmission: Mother of All Manuals
No, they will. However, the wheels will stick out .5" more than stock and sit flush with your fenders (you won't have a tucked-in look). An 8" wheel w/4.5" b.s. gives you 3.5" from the hub out, while 8.5" w/4.5" b.s. will give you 4" out from the hub.
#14
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Alabama
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS 25th Anniversary
Engine: Built 400
Transmission: 700R4
Axle/Gears: 3.73 gears
Ok well that rocks... I think I found my wheels. Thank you so much for your help!
Katy
Katy
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Engine/Drivetrain/Suspension Wanted
3
10-04-2015 09:44 PM